Description
Technical Specifications
| Parameter | Specification |
|---|---|
| Manufacturer | General Electric |
| Model | IS200JPDSG1AEC |
| Pulse Inputs | 4–8 pulse inputs (J-type, speed, flow, position sensors) |
| Data Synchronization | Time alignment, phase synchronization, coordinated data acquisition (enhanced) |
| J-Type Gateway Functions | Data routing, protocol conversion, gateway communication |
| Supported Protocols | Modbus RTU, GE pulse protocols, DNP3, J-type protocols |
| Communication | J-type serial interfaces, highway integration |
| Power | +5V DC / 2.0A, ±15V DC / 0.4A |
| Temp Range | -30°C to +65°C |
| MTBF | > 108,000 hours |
| Suffix Meaning | “AEC” = specific firmware/configuration for advanced synchronization features |
Advantages and Key Features
Advanced J-Gateway Pulse Data Synchronization: The IS200JPDSG1AEC provides pulse data synchronization with the “AEC” firmware configured for enhanced timing and synchronization accuracy.
Enhanced Synchronization Features: Improved time alignment and phase synchronization.
Expanded Protocol Support: Includes DNP3 for enhanced network integration.
J-Type Gateway Functions: The IS200JPDSG1AEC enables data routing and protocol conversion.
Pre-Configured Firmware: “AEC” firmware reduces commissioning time.
Application Fields and Case Studies
Used in pulse data synchronization applications requiring advanced timing features, J-type network integration with DNP3 support, and gateway communication for synchronized pulse data. In a 600 MW plant with demanding timing requirements, the IS200JPDSG1AEC provided enhanced synchronization accuracy.
Comparison with Competing Products
| Dimension | IS200JPDSG1AEC | IS200JPDSG1A | IS200JPDMG1ADC |
|---|---|---|---|
| Primary Function | Pulse data synchronization | Pulse data synchronization | Pulse data management |
| Synchronization Features | Advanced | Standard | No |
| Protocol Support | + DNP3 | Standard | + DNP3 |
| VME Integration | Direct | Direct | Direct |
Selection Recommendations
Choose IS200JPDSG1AEC when your pulse data synchronization application requires advanced timing features or expanded protocol support. Verify “AEC” firmware matches your specific synchronization and protocol requirements before commissioning.
Precautions and Important Notes
Use ESD-safe handling. Verify field wiring and pulse connections. Confirm “AEC” firmware supports your specific pulse sensors and synchronization requirements. Never interrupt firmware updates. Board draws 2.0A – verify rack power capacity. Document all configurations. Store spares in anti-static packaging. Do not mix IS200JPDSG1AEC with IS200JPDSG1A in redundant pairs without verifying identical firmware. Allow 30 seconds boot time. Test all synchronization and gateway functions during commissioning. If replacing an IS200JPDSG1A with an IS200JPDSG1AEC, verify all network configurations and protocols are compatible with the new firmware before installation. Ensure proper shielding for pulse signals to avoid noise interference. The IS200JPDSG1AEC is critical for pulse data synchronization – ensure all settings are verified before placing in service. Regular verification of pulse data quality and synchronization accuracy is recommended. Ensure communication cabling does not exceed maximum recommended length.
HALTEC TSR 435S-5/15A
YASKAWA CIMR-HB4A0006FBC
YASKAWA CIMR-HB4A0006ABC
A-B 1747-SDN C
Reviews
There are no reviews yet.