Description
Technical Specifications
| Parameter | Specification |
|---|---|
| Manufacturer | General Electric |
| Model | IS200EPSDG1AAB |
| Communication Interfaces | 2× configurable ports (RS-485 / fieldbus) |
| Supported Protocols | Modbus RTU, DNP3, GE proprietary protocols (variant-specific) |
| Power Supply Functions | UPS monitoring, battery charger control, DC distribution monitoring |
| Supported Equipment | UPS systems, battery chargers, DC power supplies (specific families) |
| Power | +5V DC / 2.0A, ±15V DC / 0.4A |
| Temp Range | -30°C to +65°C |
| MTBF | > 115,000 hours |
| Suffix Meaning | “AAB” = specific firmware/configuration for different UPS/battery equipment families |
Advantages and Key Features
Dedicated Power Supply Gateway with Variant-Specific Firmware: The IS200EPSDG1AAB provides optimized communication with UPS and battery systems, with the “AAB” firmware configured for specific equipment families.
Enhanced Battery Monitoring: The “AAB” firmware on the IS200EPSDG1AAB may include specialized battery health algorithms, detailed charge/discharge monitoring, and predictive maintenance indicators.
Multi-Protocol Support: Supports Modbus RTU and DNP3 with variant-specific optimizations.
Pre-Configured Firmware: Reduces commissioning time for specific power supply equipment.
Comprehensive Diagnostics: Includes UPS status, battery health, power quality, and fault reporting.
Application Fields and Case Studies
Used in GE turbine installations with specific UPS or battery charger models requiring the “AAB” firmware variant. In a 600 MW plant with a particular UPS manufacturer, the IS200EPSDG1AAB was selected for its compatibility with the site’s specific battery monitoring and power quality reporting profiles, enabling detailed battery health trending and early failure prediction.
Comparison with Competing Products
| Dimension | IS200EPSDG1AAB | IS200EPSDG1A | IS200EPDMG1BAA |
|---|---|---|---|
| Primary Function | Power supply/UPS | Power supply/UPS | Power distribution + motor |
| Firmware Variant | AAB (specific equipment) | A (general) | BAA (switchgear-specific) |
| Equipment Support | Specific UPS/battery families | General UPS/battery | Switchgear/MCC families |
| VME Integration | Direct | Direct | Direct |
Selection Recommendations
Choose IS200EPSDG1AAB when your UPS, battery charger, or DC power systems require the “AAB” firmware variant. Select over IS200EPSDG1A when compatibility with specific equipment families or enhanced battery monitoring features are required. Verify “AAB” firmware matches your equipment before commissioning. For general power supply monitoring, IS200EPSDG1A may be sufficient.
Precautions and Important Notes
Use ESD-safe handling. Verify communication wiring and settings. Confirm “AAB” firmware supports your specific UPS/battery equipment. Never interrupt firmware updates. Board draws 2.0A – verify rack power capacity. Document all configurations. Store spares in anti-static packaging. Do not mix IS200EPSDG1AAB with IS200EPSDG1A in redundant pairs without verifying identical firmware. Allow 30 seconds boot time. Test all monitoring functions during commissioning. If replacing an IS200EPSDG1A with an IS200EPSDG1AAB, verify all equipment is compatible with the new firmware before installation.
SCHNEIDER 140CRP93200
GE INTERCONNECT CABLE
GE IC200GBI001
WESTINGHOUSE 1C31132G01
Reviews
There are no reviews yet.