GE DS3820FE1A1B1B

Key Parameters

• Channels: 4 independent counter/encoder inputs

• Input Type: Differential RS-422 (A+, A-, B+, B-, Z+, Z-) or single-ended 24 V DC (software-configurable per channel)

• Maximum Input Frequency: 500 kHz per channel (with filtering disabled)

• Resolution: 32-bit counter per channel

• Count Modes: Up/down counting, quadrature x1/x2/x4, frequency measurement, period measurement, pulse-width measurement

• Input Filtering: Software-selectable 0.1–10 ms debounce

• Diagnostics: Per-channel LED status, over-range detection, count-lost detection

• Isolation: 1500 V RMS (field-to-backplane); 500 V RMS between channels

• Terminal Type: Fixed mixed configuration (per suffix “1A1B1B” – details vary by variant)

• Power: 24 V DC backplane power, ≤3 W (plus external field supply)

• Operating Temperature: –40°C to +70°C

Advantages

• Differential RS-422 inputs – superior noise immunity for long cable runs (up to 100 m); rejects common-mode noise in high-EMI environments.

• 4 independent channels – four high-speed counters in one slot; saves rack space.

• High-speed 500 kHz input – supports high-resolution encoders and high-speed motion applications.

• Versatile measurement modes – supports counting, quadrature decoding (x1/x2/x4), frequency, period, and pulse-width measurement – all in one module.

• Quadrature x4 decoding – delivers 4× resolution from standard incremental encoders.

• Flexible input configuration – each channel independently set for differential (RS-422) or single-ended (24 V DC) input.

• Hot-swappable – replace without rack power-down.

• 32-bit counters – eliminates rollover concerns for most industrial applications.

Applications

• Position feedback – reading incremental encoders on servo motors, conveyors, and positioning tables

• Flow measurement – counting pulses from turbine flowmeters with long cable runs

• Speed monitoring – frequency measurement from proximity sensors on rotating shafts

• Web handling – tension control and registration with encoder feedback

• Packaging machinery – product counting and cut-to-length positioning

• Printing presses – registration control with quadrature encoders

• Wind turbines – speed and position monitoring with long cable runs

Competitor Comparison

The DS3820FE1A1B1B is the high-density, high-speed encoder input module – offering four 500 kHz channels in a single slot. Compared to the 2-channel DS3820CI2AD21C, it doubles channel count and increases frequency from 100 kHz to 500 kHz, at a lower per-channel cost. Against competitor 4-channel modules, the DS3820FE1A1B1B offers superior measurement versatility (frequency, period, pulse-width) and flexible input configuration (differential/single-ended) at a competitive price. For applications requiring multiple high-speed encoder inputs, the DS3820FE1A1B1B delivers the most cost-effective and space-efficient solution.

Selection Tips

• Choose DS3820FE1A1B1B when you need multiple high-speed encoder/counter inputs (up to 4 channels) in a single slot.

• Ideal for motion control, positioning, flow totalization, and speed monitoring with high-frequency signals.

• Verify the input type matches your sensors – supports differential RS-422 or single-ended 24 V DC.

• Confirm the terminal configuration (1A1B1B) matches your panel wiring requirements.

• Not suitable for 5 V TTL encoders without external level shifting.

• Ensure your PLC/DCS can handle the data throughput from four high-speed channels.

Precautions

• Frequency limits: Maximum 500 kHz achieved with filtering disabled. Enable filtering only if necessary – it reduces maximum frequency.

• Differential wiring: Use twisted-pair shielded cables for each differential pair (A+/A-, B+/B-, Z+/Z-). Maintain proper cable twist for noise rejection.

• Cable length: Differential mode supports up to 100 m with proper shielding; beyond this, signal degradation may occur.

• Termination: For long cables, consider adding 120 Ω termination resistors at the module end to reduce reflections.

• Single-ended mode: Connect unused differential input (-) to common ground to avoid floating inputs.

• Power: Requires external 24 V field supply for sensors/encoders – ensure supply capacity for encoder current draw.

• Grounding: Ground shield at module end only to avoid ground loops.

• Configuration: Set differential/single-ended mode before operation – changing modes during runtime may cause count errors.

• Spare: Keep one spare DS3820FE1A1B1B for critical motion or flow applications – the 4-channel high-speed feature set may have longer lead times.