GE DS3810CMBA

Key Parameters

• Current Monitoring Channels: 4 or 8 independent current sensing channels

• Current Range: 0–10A per channel (configurable with external shunts)

• Voltage Monitoring Channels: 2 or 4 DC voltage inputs (for battery and bus monitoring)

• Battery Monitoring: Battery voltage, charge/discharge status, battery health estimation

• Input Types: External current shunts (50mV or 100mV) or Hall-effect sensors

• Monitoring Resolution: 12-bit ADC with ±0.5% accuracy

• Alarm Outputs: Form-C relay contacts for power alarm and battery alarm (normally energized)

• Diagnostics: Per-channel LED status, over-current alarm, under-voltage alarm, battery low alarm, self-test on power-up

• Isolation: 2500V RMS channel-to-backplane

• Temp Range: –30°C to +70°C

• Power Supply: +5V (logic), +24V (field power) from backplane

• Physical: 6U VME single-slot board

• Key Features: Current monitoring, battery voltage monitoring, alarm relay outputs, DC bus health monitoring, self-test

Advantages

• Power system health monitoring – the DS3810CMBA provides continuous monitoring of critical DC power distribution circuits, detecting over-current, under-voltage, and battery degradation before they cause system failures.

• Battery health estimation – monitors battery voltage and charge/discharge status, providing early warning of failing backup batteries.

• Dual alarm outputs – independent relay alarms for power faults and battery faults, allowing separate alerting and control actions.

• Flexible input configuration – supports external current shunts (50mV or 100mV) or Hall-effect sensors, accommodating different current ranges and installation requirements.

• Visual diagnostics – per-channel LEDs and alarm status simplify troubleshooting of power distribution issues.

• High isolation – 2500V RMS isolation protects the backplane and processor from field-side faults.

• Self-test on power-up – the General Electric DS3810CMBA verifies its monitoring circuitry at startup, ensuring reliable operation.

• Drop-in compatible – works with all Mark IV backplanes and processor configurations.

Applications

• DC power distribution monitoring – monitors current draw on key power supply outputs (+5V, ±15V, +24V) to detect overloads, short circuits, or failing power supplies.

• Battery backup system monitoring – the DS3810CMBA monitors voltage and charge status of backup batteries used for memory retention (e.g., DS3800NVMB) and critical circuit power.

• Preventive maintenance – provides early warning of power system degradation, enabling proactive replacement of failing power supplies or batteries.

• Alarm annunciation – drives panel alarms and DCS inputs for power faults and battery low conditions.

• System diagnostics – the General Electric DS3810CMBA provides valuable data for root-cause analysis of system failures related to power issues.

• Retrofits – replaces discrete current meters and battery monitors with an integrated VME solution.

vs Competitors & Related Products

Selection Tips

• Power monitoring needed – choose the DS3810CMBA for centralized monitoring of DC power distribution and battery systems within the Mark IV cabinet.

• Battery-backed systems – if your installation uses batteries for memory retention (e.g., DS3800NVMB) or critical power, the General Electric DS3810CMBA provides essential battery health monitoring.

• Current range matching – select the appropriate external shunt (50mV or 100mV) based on the expected current range for each monitored circuit.

• Alarm configuration – configure the relay alarm thresholds (over-current, under-voltage, battery low) to match your system’s operational limits.

• Spare strategy – keep one DS3810CMBA per 5–8 installed units, especially in systems where power monitoring is critical for reliability.

• Calibration – periodically verify current and voltage monitoring accuracy using a precision multimeter and current source.

Critical Precautions

• Current shunt installation – ensure the DS3810CMBA current shunts are correctly installed in the monitored circuit (in-line with the power supply output). Incorrect installation can create safety hazards or damage the board.

• Shunt selection – use only the specified shunt type (50mV or 100mV) for each channel of the DS3810CMBA. Using an incorrect shunt will produce inaccurate current readings.

• Voltage input limits – never apply voltage above 60V DC to the voltage monitoring inputs of the General Electric DS3810CMBA. Over-voltage can damage the input circuitry.

• Alarm wiring – the alarm relay contacts are typically normally energized; ensure proper wiring for fail-safe operation (alarm on loss of power).

• Wiring separation – keep low-level current sense wiring away from high-voltage AC power lines to prevent noise pickup on the DS3810CMBA.

• Grounding – use single-point grounding for all current shunts and voltage monitoring connections to avoid ground-loop currents that can affect accuracy.

• Battery monitoring – when monitoring battery systems, ensure the DS3810CMBA is not drawing significant current from the battery, which could affect battery health estimation.

• Self-test – allow the DS3810CMBA to complete its power-up self-test (~1 second) before relying on monitoring data.

• Calibration intervals – schedule periodic calibration verification (every 12–18 months) to maintain monitoring accuracy.

• Hot-swap – never insert or remove the DS3810CMBA while the rack is powered; this can cause measurement errors or damage.

• ESD handling – always use a grounded wrist strap when handling the DS3810CMBA; sensitive analog components are ESD-sensitive.

• Storage – store spare DS3810CMBA boards in anti-static bags in a dry, temperature-controlled environment.