Description
Key Technical Parameters
| Parameter | Specification |
|---|---|
| Manufacturer | General Electric (GE) |
| Series | Mark V (Speedtronic) |
| Full Model | DS3800NMEC1F1D |
| Power Supply | +5V DC @ 5.5A, +15V DC @ 1.3A, -15V DC @ 1.1A |
| Temperature Inputs | 4 thermocouple + 8 RTD = 12 total channels (24-bit ADC, ±0.5°C / ±0.3°C) |
| Relay Outputs | 8 mechanical relays, 8A continuous @ 115VAC/30VDC (surge 15A) with predictive maintenance |
| SS Outputs | 4 solid-state relays, 3A continuous @ 24–48VDC with individual current monitoring |
| Tachometer Inputs | None |
| Communication | Dual-redundant backplane paths |
| Operating Temperature | -40°C to +85°C |
| Vibration Resistance | 5g RMS (MIL-STD-810G) |
| Fault Log | 500 events |
| LED Indicators | Power, Relay Run (8x amber), SS Run (4x green), SS Overcurrent (flashing red), Over-Temp Alarm, RTD Fault (yellow), Relay Degradation (orange), Predictive Model Active (blue), Redundant Path Active, Model Learning (flashing blue), Backplane Active, Bus Fault |
Advantages and Distinctive Features
-
8A Mechanical Relays: Supports larger AC/DC fans (up to 1.5HP).
-
3A Solid-State Outputs with Current Monitoring: Upgraded from 2A with overcurrent detection.
-
Redundant Backplane Communication: Dual paths with automatic failover (<50ms).
-
Hybrid Output Architecture: Combines 8 mechanical relays (8A) with 4 solid-state outputs (3A) on a single board.
-
Dual Temperature Sensor Support (4 T/C + 8 RTD): 12 total temperature channels.
-
Predictive Thermal Modeling: Learns cabinet thermal response during 24-hour initial period, reducing temperature overshoot by up to 50%.
-
Predictive Relay Maintenance: Real-time contact resistance monitoring with degradation warning.
-
RTD Fault Detection: Continuous monitoring for open-circuit, short-circuit, or lead-wire degradation.
-
24-Bit Ultra-High Precision ADC: ±0.5°C for thermocouples, ±0.3°C for RTDs.
-
Extended +85°C Operation: Surpasses the +75°C limit.
-
500-Event Fault Log: Comprehensive diagnostics.
Typical Application Fields
-
Fan-Dense Mixed Fan Cabinets: Where both high-power AC/DC fans and medium-power DC auxiliary fans are present.
-
Mission-Critical Cooling Systems: Where redundant communication is required.
-
RTD-Heavy Cabinets: Where RTD sensors are preferred.
-
Offshore Oil & Gas Platforms: Extreme temperature and vibration environments.
-
Desert Power Plants: 85°C upper limit.
-
Nuclear Auxiliary Turbines: High reliability with redundant communication.
Comparison with Related Models
| Feature | DS3800NMEC1F1D | DS3800NMEC1F1C | DS3800NMEC1E1E | DS3800NMEA1D1G |
|---|---|---|---|---|
| Relay Current | 8A | 8A | 5A | 5A |
| SS Current | 3A | 2A | 2A | 3A |
| SS Current Monitoring | Yes | No | No | Yes |
| T/C + RTD Inputs | 4 + 8 = 12 | 4 + 8 = 12 | 4 + 8 = 12 | 8 + 8 = 16 |
| Redundant Comms | Yes | Yes | No | No |
| Predictive Modeling | Yes | Yes | Yes | Yes |
| Predictive Maintenance | Yes | Yes | Yes | Yes |
| Operating Temp | -40°C to +85°C | -40°C to +85°C | -40°C to +85°C | -40°C to +85°C |
| Tach Inputs | None | None | None | 2 channels |
| Cost | Ultra-Premium++ | Ultra-Premium+ | Ultra-Premium | Ultra-Premium |
Selection Recommendations
-
Choose the DS3800NMEC1F1D if:
-
You need 8A relay outputs for larger fans.
-
You need 3A solid-state outputs with current monitoring for auxiliary fans.
-
You require redundant backplane communication for fault tolerance.
-
You require both thermocouple and RTD inputs (12 total channels).
-
You want predictive thermal modeling and predictive relay maintenance.
-
You do not require tachometer feedback.
-
Your installation operates in extreme environments (-40°C to +85°C).
-
-
Choose the DS3800NMEC1F1C if: You need 2A SS outputs without current monitoring.
-
Choose the DS3800NMEA1D1G if: You need 8 thermocouple + 8 RTD inputs, tachometer feedback, and 3A SS outputs but without redundant communication.
Critical Precautions
-
ESD Protection: Always wear a grounded wrist strap.
-
High-Voltage/Current Hazard: Relay outputs switch 115VAC/8A—lethal. Use proper insulation.
-
Relay Inductive Derating: For inductive fan motors, derate from 8A to 6A or use RC snubbers.
-
DC Polarity (SS): Solid-state outputs are DC-only and polarity-sensitive.
-
SS Overcurrent: If output exceeds 3.5A, LED flashes red—persistent overcurrent triggers bus fault.
-
RTD Wiring: Use 3-wire Pt100 RTDs. All three wires must be connected.
-
Redundant Paths: Both backplane paths must be connected for full fault tolerance.
-
Predictive Model Learning: Requires 24-hour initial learning—do not interrupt power.
-
No Hot-Swap: Always depower the rack before insertion/removal.
-
Slot Assignment: Install in slots 8–10 (auxiliary I/O).
-
CPU Compatibility: Requires Mark V CPU firmware v6.0 or higher for full features.
-
Power Supply: Draws 5.5A on +5V rail—verify sufficient capacity.
AB 1784-SD1/A
AB 20-HIM-A6
P+F NCN40+U4+N0
Reviews
There are no reviews yet.