Description
Key Technical Parameters
| Parameter | Specification |
|---|---|
| Manufacturer | General Electric (GE) |
| Series | Mark V (Speedtronic) |
| Full Model | DS3800NMEC1D1B |
| Power Supply | +5V DC @ 4.0A, +15V DC @ 0.7A, -15V DC @ 0.5A |
| Temperature Inputs | 4 thermocouple channels (Type J/K/T, 24-bit ADC, ±0.5°C accuracy) |
| Relay Outputs | 8 mechanical relays, 5A continuous @ 115VAC/30VDC (surge 10A) with predictive maintenance |
| SS Outputs | 4 solid-state relays, 2A continuous @ 24–48VDC |
| Tachometer Inputs | None |
| Communication | Mark V proprietary parallel backplane bus |
| Operating Temperature | -40°C to +75°C |
| Vibration Resistance | 5g RMS (MIL-STD-810G) |
| Fault Log | 200 events |
| LED Indicators | Power, Relay Run (8x amber), SS Run (4x green), Over-Temp Alarm, Relay Degradation Warning, Backplane Active, Bus Fault |
Advantages and Distinctive Features
-
Hybrid Output Architecture: Combines 8 mechanical relays (5A) with 4 solid-state outputs (2A) on a single board.
-
24-Bit Ultra-High Precision ADC: ±0.5°C accuracy for precise thermal management.
-
Predictive Relay Maintenance: Real-time contact resistance monitoring with relay degradation warning.
-
Extended Environmental Tolerance: -40°C to +75°C with 5g vibration resistance.
-
5A Mechanical Relays: Supports larger AC/DC fans.
-
Fan-Dense Design: 8 relay outputs + 4 SS outputs with only 4 temperature inputs.
-
200-Event Fault Log: Stores temperature alarms and relay degradation events.
Typical Application Fields
-
Fan-Dense Mixed Fan Cabinets: Where both high-power AC/DC fans and low-voltage DC auxiliary fans are present.
-
Offshore Oil & Gas Platforms: Extreme temperature and vibration environments.
-
Desert Power Plants: 75°C upper limit.
-
Arctic Compressor Stations: -40°C low-temperature tolerance.
-
Safety-Critical Cooling Systems: Where relay health monitoring is mandatory.
Comparison with Related Models
| Feature | DS3800NMEC1D1B | DS3800NMEC1C1B | DS3800NMEC (Base) | DS3800NMEA1D1G |
|---|---|---|---|---|
| Relay Outputs | 8 × 5A | 8 × 5A | 8 × 5A | 8 × 5A |
| SS Outputs | 4 × 2A | 4 × 2A | 4 × 2A | 4 × 3A |
| T/C Inputs | 4 | 4 | 4 | 8 |
| ADC Resolution | 24-bit (±0.5°C) | 16-bit (±1°C) | 12-bit (±2°C) | 24-bit (±0.5°C) |
| Predictive Maintenance | Yes | No | No | Yes |
| Operating Temp | -40°C to +75°C | -20°C to +65°C | 0°C to +60°C | -40°C to +85°C |
| Vibration | 5g RMS | 2g RMS | 1g RMS | 5g RMS |
| Fault Log | 200 events | Basic | Basic | 500 events |
| Firmware | D | C | A | D |
| Cost | High | Medium | Medium | Ultra-Premium |
Selection Recommendations
-
Choose the DS3800NMEC1D1B if:
-
You need 5A relay outputs (AC or DC) for main fans.
-
You also need solid-state outputs (24–48VDC) for auxiliary fans or alarms.
-
You want ultra-precise temperature monitoring (±0.5°C).
-
You need predictive relay maintenance.
-
Your installation is in extreme environments (-40°C to +75°C) with high vibration.
-
You do not require tachometer feedback.
-
-
Choose the DS3800NMEA1D1G if: You need 8 thermocouple inputs, 3A SS outputs, and extreme temperature range (-40°C to +85°C).
-
Choose the DS3800NMEC1C1B if: You need 5A relays and improved accuracy without extreme temperature tolerance.
Critical Precautions
-
ESD Protection: Always wear a grounded wrist strap. Static damage to the 24-bit ADC degrades accuracy.
-
High-Voltage/Current Hazard: Relay outputs switch 115VAC/5A—lethal. Use proper insulation.
-
Relay Inductive Derating: For inductive fan motors, derate from 5A to 3.5A or use RC snubbers.
-
DC Polarity (SS): Solid-state outputs are DC-only and polarity-sensitive—reverse polarity destroys the MOSFET.
-
Missing T/C Channels: Only 4 thermocouple inputs (channels 1–4). Channels 5–8 are physically absent.
-
No Tachometer Inputs: Do not connect speed sensors.
-
No Hot-Swap: Always depower the rack before insertion/removal.
-
Slot Assignment: Install in slots 8–10 (auxiliary I/O).
-
CPU Dependency: If backplane communication is lost, the board defaults to 100% fan speed—predictive maintenance disabled in fallback mode.
-
Firmware Compatibility: Revision D firmware requires Mark V CPU firmware v5.0 or higher for full 24-bit ADC and predictive maintenance. For v4.x, reverts to 16-bit mode with no predictive maintenance.
-
Power Supply: Draws 4.0A on +5V rail—verify sufficient capacity.
ASCO SCG531C001MS
A-B 100-C37D00
MITSUBISHI Q35B
Reviews
There are no reviews yet.