Description
Key Technical Parameters
| Parameter | Specification |
|---|---|
| Manufacturer | General Electric (GE) |
| Series | Mark V (Speedtronic) |
| Full Model | DS3800NMEC1C1B |
| Power Supply | +5V DC @ 3.6A, +15V DC @ 0.6A, -15V DC @ 0.4A |
| Temperature Inputs | 4 thermocouple channels (Type J/K/T, 16-bit ADC, ±1°C accuracy) |
| Relay Outputs | 8 mechanical relays, 5A continuous @ 115VAC/30VDC (surge 10A) |
| SS Outputs | 4 solid-state relays, 2A continuous @ 24–48VDC |
| Tachometer Inputs | None |
| Communication | Mark V proprietary parallel backplane bus |
| Operating Temperature | -20°C to +65°C |
| LED Indicators | Power, Relay Run (8x amber), SS Run (4x green), Over-Temp Alarm, Backplane Active |
Advantages and Distinctive Features
-
Hybrid Output Architecture: Combines 8 mechanical relays (5A) with 4 solid-state outputs (2A) on a single board.
-
Extended Temperature Range: -20°C to +65°C supports moderately harsh environments.
-
Improved Temperature Accuracy (16-bit ADC): ±1°C accuracy—double the precision of the base 12-bit (±2°C) model.
-
Higher Relay Current (5A): Supports larger AC/DC fans compared to standard 3A hybrid boards.
-
Fan-Dense Design: 8 relay outputs + 4 SS outputs with only 4 temperature inputs.
-
Enhanced Cold-Junction Compensation (Revision C): Improved temperature measurement stability.
Typical Application Fields
-
Fan-Dense Mixed Fan Cabinets: Where both high-power AC/DC fans and low-voltage DC auxiliary fans are present.
-
Unheated Shelters & Outdoor Enclosures: -20°C to +65°C range.
-
Moderately Harsh Environments: Where climate control is limited.
Comparison with Related Models
| Feature | DS3800NMEC1C1B | DS3800NMEC1B1A | DS3800NMEC (Base) | DS3800NMEA1D1G |
|---|---|---|---|---|
| Relay Outputs | 8 × 5A | 8 × 5A | 8 × 5A | 8 × 5A |
| SS Outputs | 4 × 2A | 4 × 2A | 4 × 2A | 4 × 3A |
| T/C Inputs | 4 | 4 | 4 | 8 |
| ADC Resolution | 16-bit (±1°C) | 16-bit (±1°C) | 12-bit (±2°C) | 24-bit (±0.5°C) |
| Operating Temp | -20°C to +65°C | 0°C to +60°C | 0°C to +60°C | -40°C to +85°C |
| Firmware | C | B | A | D |
| Cost | Medium | Medium | Medium | High |
Selection Recommendations
-
Choose the DS3800NMEC1C1B if:
-
You need 5A relay outputs (AC or DC) for main fans.
-
You also need solid-state outputs (24–48VDC) for auxiliary fans or alarms.
-
You want improved temperature accuracy (±1°C).
-
Your installation requires extended temperature range (-20°C to +65°C).
-
You do not require tachometer feedback.
-
-
Choose the DS3800NMEC1B1A if: You need the same features but operate in a climate-controlled environment (0°C to +60°C).
-
Choose the DS3800NMEA1D1G if: You need 8 thermocouple inputs, 3A SS outputs, and extreme temperature range (-40°C to +85°C).
Critical Precautions
-
ESD Protection: Always wear a grounded wrist strap.
-
High-Voltage/Current Hazard: Relay outputs switch 115VAC/5A—lethal voltage/current present. Use proper insulation.
-
Relay Inductive Derating: For inductive fan motors, derate from 5A to 3.5A or use RC snubbers.
-
DC Polarity (SS): Solid-state outputs are DC-only and polarity-sensitive—reverse polarity destroys the MOSFET.
-
SS Current Limitation: Rated at 2A continuous @ 24–48VDC.
-
Missing T/C Channels: Only 4 thermocouple inputs (channels 1–4). Channels 5–8 are physically absent.
-
No Tachometer Inputs: Do not connect speed sensors.
-
No Hot-Swap: Always depower the rack before insertion/removal.
-
Slot Assignment: Install in slots 8–10 (auxiliary I/O).
-
CPU Dependency: If backplane communication is lost, the board defaults to 100% fan speed.
-
Firmware Compatibility: Revision C firmware is compatible with Mark V CPU firmware v4.0 and above. For v3.x, the enhanced ADC features may be partially disabled—confirm compatibility before purchasing.
SIEMENS 3TH2031-0HY4
GE IC200PWR102
A-B 1794-IB16
Reviews
There are no reviews yet.