Description
Key Technical Parameters
| Parameter | Specification |
|---|---|
| Full Model | DS3800NHVD1D1B |
| Power Supply | +5V DC @ 3.6A, +15V DC @ 0.6A, -15V DC @ 0.4A |
| Temperature Inputs | 8 thermocouple channels (Type J/K/T, 24-bit ADC, ±0.5°C accuracy) |
| Fan Outputs | 8 mechanical relays, 1A continuous @ 250VDC (surge 2A) |
| Tachometer Inputs | None |
| Communication | Mark V proprietary parallel backplane bus |
| Operating Temperature | -40°C to +75°C |
| Vibration Resistance | 5g RMS (MIL-STD-810G) |
| Fault Log | 200 events |
| LED Indicators | Power, Fan Run (8x amber), Over-Temp Alarm, Relay Degradation Warning, Backplane Active, Bus Fault |
Advantages and Distinctive Features
-
250VDC High-Voltage Output Capability: Supports 220–250VDC fan systems—ideal for high-voltage industrial, railway, and specialized turbine applications.
-
24-Bit Ultra-High Precision ADC: ±0.5°C accuracy for precise thermal management.
-
Predictive Relay Maintenance: Real-time contact resistance monitoring with relay degradation warning—critical for high-voltage DC applications where contact wear is accelerated.
-
Extended Environmental Tolerance: -40°C to +75°C with 5g vibration resistance.
-
200-Event Fault Log: Stores temperature alarms, relay degradation events, and fallback activations.
-
Silver-Alloy Relay Contacts: Superior resistance to welding and pitting at high DC voltages.
Typical Application Fields
-
High-Voltage Industrial Fan Systems: 220VDC or 250VDC motor control with predictive maintenance.
-
Railway and Traction Applications: High-voltage DC auxiliary systems in extreme environments.
-
Specialized Turbine Installations: High-voltage DC cooling systems requiring ultra-precise temperature monitoring.
-
Offshore Platforms: Extreme temperature and vibration environments.
-
Military & Naval Applications: High-voltage DC systems with high reliability requirements.
Comparison with Related Models
| Feature | DS3800NHVD1D1B | DS3800NHVD1C1B | DS3800NHVD (Base) | DS3800NHVB |
|---|---|---|---|---|
| Output Voltage | 250VDC | 250VDC | 250VDC | 125VDC |
| Output Current | 1A | 1A | 1A | 2A |
| ADC Resolution | 24-bit (±0.5°C) | 16-bit (±1°C) | 12-bit (±2°C) | 12-bit (±2°C) |
| Predictive Maintenance | Yes | No | No | No |
| Operating Temp | -40°C to +75°C | -20°C to +65°C | 0°C to +60°C | 0°C to +60°C |
| Vibration | 5g RMS | 2g RMS | 1g RMS | 1g RMS |
| Fault Log | 200 events | Basic | Basic | Basic |
| Cost | High | Medium-High | Medium | Medium |
Selection Recommendations
-
Choose the DS3800NHVD1D1B if:
-
Your fans operate on 220–250VDC high-voltage DC systems.
-
You need ultra-precise temperature monitoring (±0.5°C).
-
You want predictive relay maintenance to avoid unplanned downtime.
-
Your installation is in extreme environments (-40°C to +75°C) with high vibration.
-
You require 200-event fault logging.
-
-
Choose the DS3800NHVD1C1B if: You need 250VDC capability with improved accuracy and moderate temperature range but without predictive maintenance.
-
Choose the DS3800NHVB if: Your fans operate on 110–125VDC systems.
Critical Precautions
-
ESD Protection: Always wear a grounded wrist strap.
-
Extreme High-Voltage Hazard: Switches 250VDC—lethal voltage present on output terminals. Observe all high-voltage safety procedures. Use wiring rated for ≥250VDC.
-
DC Polarity: Outputs are DC only—observe correct polarity.
-
Current Limitation: Rated at only 1A continuous. Verify fan current does not exceed this limit.
-
Inductive Load Derating: For inductive fan motors, derate to 0.75A or use external RC snubbers (rated for 250VDC).
-
No AC Connection: Do not connect AC loads.
-
No Hot-Swap: Always depower the rack before insertion/removal.
-
Slot Assignment: Install in slots 8–10 (auxiliary I/O).
-
CPU Dependency: If backplane communication is lost, the board defaults to 100% fan speed—predictive maintenance disabled in fallback mode.
-
Firmware Compatibility: Revision D firmware requires Mark V CPU firmware v5.0 or higher for full predictive maintenance and 24-bit ADC functionality. For v4.x, the board reverts to 16-bit mode with no predictive maintenance.
-
Power Supply: Draws 3.6A on +5V rail—verify sufficient capacity.
GE IC693CHS391
CJK5-111
GE IC693MDL740
A-B 1756-RMC1
Reviews
There are no reviews yet.