Description
Key Technical Parameters
| Parameter | Specification |
|---|---|
| Manufacturer | General Electric (GE) |
| Series | Mark V (Speedtronic) |
| Full Model | DS3800NGDC1A1A |
| Power Supply | +5V DC @ 3.0A, +15V DC @ 0.5A, -15V DC @ 0.3A (via backplane) |
| Temperature Inputs | 8 differential thermocouple channels (Type J/K/T, 12-bit ADC, ±2°C accuracy) |
| RTD Inputs | None |
| Fan Outputs | 8 mechanical relays, 3A continuous @ 115VAC or 30VDC (surge 5A for 100ms) |
| Tachometer Inputs | None |
| Communication | Mark V proprietary parallel backplane bus |
| Operating Temperature | 0°C to +60°C |
| Storage Temperature | -40°C to +85°C |
| LED Indicators | Power (green), Fan Run (8x amber), Over-Temp Alarm (red), Backplane Active (yellow) |
Advantages and Distinctive Features
-
Mechanical Relay Outputs: The DS3800NGDC1A1A provides 3A mechanical relays with 5A surge handling, offering complete galvanic isolation (2500V) and robust AC/DC switching capability.
-
Full 8 Thermocouple Inputs: Comprehensive zone-by-zone temperature monitoring for large cabinets.
-
Simple, CPU-Dependent Operation: No onboard setpoint storage or logic—relies entirely on the Mark V CPU, keeping the board simple and cost-effective.
-
AC/DC Output Capability: Can switch both AC and DC fan loads, offering flexibility for mixed cabinet installations.
-
Baseline Revision A: The DS3800NGDC1A1A is the original, unmodified version of this board—ideal for replacing like-for-like in legacy systems.
Typical Application Fields
-
Climate-Controlled Indoor Installations: 0°C to +60°C range supports standard power plant environments.
-
Turbine Cabinets with AC or DC Fans: Where tachometer feedback is not required.
-
Legacy System Replacements: Direct drop-in replacement for original DS3800NGDC boards.
-
Budget-Conscious Relay-Based Applications: Cost-effective solution for basic fan control.
-
High-Surge Fan Applications: Mechanical relays handle startup surges better than solid-state alternatives.
Comparison with Related Models
| Feature | DS3800NGDC1A1A | DS3800NGDC (Base) | DS3800NFEE | DS3800NFIB |
|---|---|---|---|---|
| Output Type | Mechanical relay | Mechanical relay | Mechanical relay | Solid-state (DC only) |
| Output Current | 3A | 3A | 3A | 2A |
| Thermocouple Inputs | 8 channels | 8 channels | 8 channels | 8 channels |
| Tachometer Inputs | None | None | None | None |
| ADC Resolution | 12-bit (±2°C) | 12-bit (±2°C) | 12-bit (±2°C) | 12-bit (±2°C) |
| Onboard Logic | No | No | No | No |
| AC Fan Capability | Yes | Yes | Yes | No |
| Operating Temp | 0°C to +60°C | 0°C to +60°C | 0°C to +60°C | 0°C to +60°C |
| Fallback Mode | Full speed (100%) | Full speed (100%) | Full speed (100%) | Full speed (100%) |
| Firmware Revision | A (baseline) | Unknown | A/B | A/B |
| Cost (Used) | Low | Low | Low | Low |
Selection Recommendations
-
Choose the DS3800NGDC1A1A if:
-
Your fans require mechanical relay outputs (AC or DC) with 3A continuous rating.
-
You do not require tachometer speed feedback.
-
Your cabinet requires 8 temperature sensors for comprehensive monitoring.
-
You have a climate-controlled environment (0°C to +60°C).
-
The Mark V CPU handles all control logic.
-
You need a direct replacement for an existing DS3800NGDC board.
-
-
Choose the DS3800NFEE if: You need similar relay functionality but prefer a different component revision (verify compatibility).
-
Choose the DS3800NFLA if: You need tachometer feedback with relay outputs.
-
Choose the DS3800NFIB if: You prefer solid-state DC outputs (silent, maintenance-free) without tachometer feedback.
Critical Precautions
-
ESD Protection: The DS3800NGDC1A1A contains sensitive ADC components. Always wear a grounded ESD wrist strap.
-
Relay Contact Wear: Mechanical relays are rated for 100,000 operations at 3A. For frequent cycling applications, consider derating or using solid-state alternatives.
-
Inductive Load Derating: The 3A rating applies to resistive loads. For inductive fan motors, derate to 2A or use an external RC snubber across each relay output.
-
No Tachometer Inputs: The DS3800NGDC1A1A has no tachometer capability. Do not connect speed sensors.
-
No Hot-Swap: Always depower the Mark V rack before inserting or removing the DS3800NGDC1A1A.
-
Slot Assignment: Install in auxiliary I/O slots (typically slots 8–10). Do not install in CPU or analog input slots.
-
CPU Dependency: Since the DS3800NGDC1A1A has no onboard logic, the Mark V CPU must send fan ON/OFF commands. If backplane communication is lost, the board defaults to 100% fan speed (fallback mode). Address communication issues promptly.
-
Firmware Compatibility: The DS3800NGDC1A1A is compatible with all Mark V CPU firmware versions (v3.x and above). No specific CPU upgrade is needed.
CJK5-250
A-B 20-HIM-A6
SIEMENS 6ES7307-1BA00-0AA0
Reviews
There are no reviews yet.