Description
Technical Parameters
| Parameter | Specification |
|---|---|
| Inputs | 16 digital, optically isolated |
| Input Voltage | 24V DC / 125V DC (selectable) |
| Input Current | 5mA typical per channel |
| Outputs | 8 digital, solid‑state (MOSFET) |
| Output Voltage | 24V DC / 125V DC (selectable) |
| Output Current | 0.5A per channel (continuous), 1.0A peak |
| Response Time | <2ms (inputs), <5ms (outputs) |
| Isolation | 1500V RMS (field‑to‑backplane) |
| Diagnostics | Open/short detection, overcurrent protection, watchdog |
| Power | +5V @ 0.9A; +15V @ 0.35A (VME backplane) |
| Firmware | Factory‑programmed (not field‑upgradeable) |
| Conformal Coating | No |
| MTBF | >195,000 hours |
Advantages
-
Standard I/O – 16 inputs and 8 outputs in a single slot.
-
Dual Voltage Support – 24V or 125V DC field power.
-
Optical Isolation – 1500V isolation for noise immunity.
-
Fast Response – <2ms input scan time.
-
Hot‑Swap Capable – IEEE 1101.11 compliant.
-
Diagnostics – Open/short detection and overcurrent protection.
Applications
| Industry | Use |
|---|---|
| Gas Turbines | Start/stop sequencing, valve control, flame detection, status monitoring |
| Steam Turbines | Emergency trip signals, solenoid control, governor actuation |
| Combined Cycle | HRSG damper control, pump run/stop status |
| Oil & Gas | Compressor anti‑surge status, shutdown logic |
Comparison
| Feature | DS3800HSAA1K1D | DS3800HSAA1K1C | DS3800HSAA | DS3800HMPK |
|---|---|---|---|---|
| Inputs | 16 digital | 16 digital | 16 digital | 8 analog |
| Outputs | 8 digital | 8 digital | 8 digital | None |
| Voltage | 24/125V selectable | 24/125V selectable | 24/125V selectable | N/A |
| Type | Digital I/O | Digital I/O | Digital I/O | Analog input |
| Best For | Standard control | Standard control | Standard control | Temperature |
Note: The DS3800HSAA1K1D is functionally identical to other HSAA variants in all key specifications. The suffix indicates a minor calibration or firmware variation.
Selection
| Scenario | Choice |
|---|---|
| Standard I/O (16 in / 8 out) | DS3800HSAA1K1D – standard control. |
| More outputs (16 in / 16 out) | Use DS3800HPLA or DS3800HRPB. |
| More inputs (32 in) | Use DS3800HPCA (32 inputs) + separate output module. |
| Temperature monitoring | Use DS3800HMPK series. |
| TMR | Three identical 1K1D modules. Do not mix revisions. |
| Non‑GE | Do not use – VME only. |
Critical Precautions
-
Authenticate – Check GE hologram, serial number.
-
ESD – Wear grounded wrist strap.
-
Backplane – Verify +5V, +15V, -15V before insertion.
-
Voltage Selection – Verify field voltage (24V or 125V) matches module configuration.
-
Wiring – Use shielded cable; maintain separation from AC power.
-
Load Check – Outputs rated 0.5A continuous; 1.0A peak. Verify connected load.
-
External Fusing – GE recommends external fuses on each output for protection.
-
Torque – 0.5‑0.6 Nm.
-
Temp – Keep rack <70°C.
-
Firmware – Factory‑programmed; cannot be field‑updated.
-
Sourcing – Obsolete; source refurbished from certified GE repair centers.
Final Summary
The General Electric DS3800HSAA1K1D is a standard digital I/O module for GE Speedtronic systems, offering 16 optically isolated inputs and 8 isolated outputs with selectable 24V or 125V DC field power. It is ideal for standard monitoring and actuation applications. It is functionally identical to other HSAA variants. For balanced I/O with more outputs, use DS3800HPLA or DS3800HRPB. For temperature monitoring, choose DS3800HMPK. Source from certified repair centers.
A-B 1756-IB16
A-B 1794-TB3G
PS-01
SCHNEIDER 140XBE10000
Reviews
There are no reviews yet.