Description
Technical Parameters
| Parameter | Specification |
|---|---|
| Inputs | 32 digital, optically isolated |
| Input Voltage | 24V DC / 125V DC (selectable) |
| Input Current | 5mA typical per channel |
| Outputs | 16 digital, solid-state (MOSFET) |
| Output Voltage | 24V DC / 125V DC (selectable) |
| Output Current | 0.5A per channel (continuous) |
| Response Time | <2ms (inputs), <5ms (outputs) |
| Isolation | 1500V RMS (field-to-backplane) |
| Diagnostics | Open/short detection, overcurrent protection, watchdog |
| Power | +5V @ 1.2A; +15V @ 0.5A (VME backplane) |
| Firmware | Factory-programmed (not field-upgradeable) |
| Conformal Coating | No |
| MTBF | >190,000 hours |
Advantages
-
Highest Density – 32 inputs + 16 outputs in a single slot (double HPBC).
-
Dual Voltage Support – 24V or 125V DC field power.
-
Optical Isolation – 1500V isolation for noise immunity.
-
Fast Response – <2ms input scan time.
-
Hot-Swap Capable – IEEE 1101.11 compliant.
-
Diagnostics – Open/short detection and overcurrent protection.
Applications
| Industry | Use |
|---|---|
| Gas Turbines | Large-scale start/stop sequencing, valve control, flame detection |
| Steam Turbines | Emergency trip signals, solenoid control, status monitoring |
| Combined Cycle | HRSG damper control, pump run/stop status |
| Oil & Gas | Compressor anti-surge status, shutdown logic |
Comparison
| Feature | DS3800HPBD1D1C | DS3800HPBD1C1C | DS3800HPBD | DS3800HMPK |
|---|---|---|---|---|
| Inputs | 32 digital | 32 digital | 32 digital | 8 analog |
| Outputs | 16 digital | 16 digital | 16 digital | None |
| Voltage | 24/125V selectable | 24/125V selectable | 24/125V selectable | N/A |
| Type | Digital I/O | Digital I/O | Digital I/O | Analog input |
| Best For | Large-scale on/off control | Large-scale on/off control | Large-scale on/off control | Temperature |
Note: The DS3800HPBD1D1C is functionally identical to the DS3800HPBD and DS3800HPBD1C1C in all key specifications. The suffix indicates a minor calibration or firmware variation.
Selection
| Scenario | Choice |
|---|---|
| Large-scale digital control with high-voltage | DS3800HPBD1D1C – double density. |
| Standard digital control | Use DS3800HPBC (16 inputs/8 outputs). |
| Digital control (24V only) | Use DS3800HP1B. |
| Temperature monitoring | Use DS3800HMPK series. |
| TMR | Three identical 1D1C modules. Do not mix revisions. |
| Non-GE | Do not use – VME only. |
Critical Precautions
-
Authenticate – Check GE hologram, serial number.
-
ESD – Wear grounded wrist strap.
-
Backplane – Verify +5V, +15V, -15V before insertion.
-
Voltage Selection – Verify field voltage (24V or 125V) matches module configuration.
-
Wiring – Use shielded cable; maintain separation from AC power.
-
Load Check – Outputs rated 0.5A continuous; do not exceed.
-
Power Budget – Higher power consumption (1.2A on +5V) – verify backplane capacity.
-
Torque – 0.5-0.6 Nm.
-
Temp – Keep rack <70°C.
-
Firmware – Factory-programmed; cannot be field-updated.
-
Sourcing – Obsolete; source refurbished from certified GE repair centers.
Final Summary
The General Electric DS3800HPBD1D1C is a high-density digital I/O module for GE Speedtronic systems, offering 32 inputs and 16 outputs with selectable 24V or 125V DC field power. It offers double the capacity of HPBC modules, making it ideal for large-scale start/stop sequencing, valve control, and alarm monitoring. It is functionally identical to the DS3800HPBD and DS3800HPBD1C1C. For standard density, use DS3800HPBC. For 24V-only applications, use DS3800HP1B. For temperature monitoring, choose DS3800HMPK. Source from certified repair centers.
A-B 1756-IM16I
ADVANTEST R6552T
A-B 1769-PB4
Reviews
There are no reviews yet.