Description
Technical Parameters
| Parameter | Specification |
|---|---|
| Inputs | 16 digital, optically isolated |
| Input Voltage | 24V DC / 125V DC (selectable) |
| Input Current | 5mA typical per channel |
| Outputs | 8 digital, solid-state (MOSFET) |
| Output Voltage | 24V DC / 125V DC (selectable) |
| Output Current | 0.5A per channel (continuous) |
| Response Time | <2ms (inputs), <5ms (outputs) |
| Isolation | 1500V RMS (field-to-backplane) |
| Diagnostics | Open/short detection, overcurrent protection, watchdog |
| Power | +5V @ 0.8A; +15V @ 0.3A (VME backplane) |
| Firmware | Factory-programmed (not field-upgradeable) |
| Conformal Coating | No |
| MTBF | >200,000 hours |
Advantages
-
High Density – 16 inputs + 8 outputs in a single slot.
-
Dual Voltage Support – 24V or 125V DC field power.
-
Optical Isolation – 1500V isolation for noise immunity.
-
Fast Response – <2ms input scan time.
-
Hot-Swap Capable – IEEE 1101.11 compliant.
-
Diagnostics – Open/short detection and overcurrent protection.
Applications
| Industry | Use |
|---|---|
| Gas Turbines | Start/stop sequencing, valve control, flame detection |
| Steam Turbines | Emergency trip signals, solenoid control |
| Combined Cycle | HRSG damper control, pump status |
| Oil & Gas | Compressor anti-surge status, shutdown logic |
Comparison
| Feature | DS3800HPBC1C1C | DS3800HPBC1B1D | DS3800HPBC | DS3800HMPK |
|---|---|---|---|---|
| Inputs | 16 digital | 16 digital | 16 digital | 8 analog |
| Outputs | 8 digital | 8 digital | 8 digital | None |
| Voltage | 24/125V selectable | 24/125V selectable | 24/125V selectable | N/A |
| Type | Digital I/O | Digital I/O | Digital I/O | Analog input |
| Best For | On/off control | On/off control | On/off control | Temperature |
Note: The DS3800HPBC1C1C is functionally identical to the DS3800HPBC, DS3800HPBC1A1B, DS3800HPBC1B1C, and DS3800HPBC1B1D in all key specifications. The suffix differences indicate minor calibration or firmware variations.
Selection
| Scenario | Choice |
|---|---|
| Digital control with high-voltage field | DS3800HPBC1C1C – dual voltage support. |
| Digital control (24V only) | Use DS3800HP1B. |
| Temperature monitoring | Use DS3800HMPK series. |
| TMR | Three identical 1C1C modules. Do not mix revisions. |
| Non-GE | Do not use – VME only. |
Critical Precautions
-
Authenticate – Check GE hologram, serial number.
-
ESD – Wear grounded wrist strap.
-
Backplane – Verify +5V, +15V, -15V before insertion.
-
Voltage Selection – Verify field voltage (24V or 125V) matches module configuration.
-
Wiring – Use shielded cable; maintain separation from AC power.
-
Load Check – Outputs rated 0.5A continuous; do not exceed.
-
Torque – 0.5-0.6 Nm.
-
Temp – Keep rack <70°C.
-
Firmware – Factory-programmed; cannot be field-updated.
-
Sourcing – Obsolete; source refurbished from certified GE repair centers.
Final Summary
The General Electric DS3800HPBC1C1C is a high-density digital I/O module for GE Speedtronic systems, offering 16 inputs and 8 outputs with selectable 24V or 125V DC field power. It is ideal for start/stop sequencing, valve control, and alarm monitoring with fast response and optical isolation. It is functionally identical to other HPBC variants. For 24V-only applications, use DS3800HP1B. For temperature monitoring, choose DS3800HMPK. Source from certified repair centers.
Consult GE Technical Support for site-specific validation.
SIEMENS 6DR4004-8J
GE IC200ALG264H
SCHNEIDER 140DAO84000
SCHNEIDER 140XBP00600
Reviews
There are no reviews yet.