Description
Technical Parameters
| Parameter | Specification |
|---|---|
| Inputs | 8 differential, TC-dedicated (J,K,T,E,R,S,B,N) |
| ADC | 24-bit sigma-delta (effective: 21 bits) |
| Accuracy | ±0.02% FS (25°C); ±0.05% (-40°C to +85°C) |
| CJC Accuracy | ±0.15°C (4 sensors) |
| Sampling | 10-2000 Hz (user-selectable) |
| Isolation | 2500V RMS |
| Power | +5V @ 1.4A; +15V @ 0.6A |
| Diagnostics | Open/short, out-of-range, rate-of-change, CJC health, telemetry, predictive health with AI-based fault prediction |
| Firmware | Field-upgradeable via JTAG, USB, and Ethernet |
| Conformal Coating | Standard (enhanced) |
| MTBF | >350,000 hours |
Advantages
-
24-Bit ADC – Ultimate resolution and accuracy.
-
Superior CJC – ±0.15°C accuracy – best in class.
-
Ultra-Fast Sampling – 2000 Hz.
-
AI-Based Predictive Diagnostics – Advanced fault prediction.
-
Ethernet Firmware Update – Convenient remote upgrades.
-
Enhanced Conformal Coating – Extra protection for extreme environments.
-
Hot-Swap Capable – IEEE 1101.11 compliant.
Applications
| Industry | Use |
|---|---|
| Gas Turbines | Advanced EGT monitoring, combustion dynamics (Frame 7HA/9HA) |
| Steam Turbines | High-precision steam temp, vibration monitoring |
| Combined Cycle | Fast-response HRSG control |
| Oil & Gas | LNG compressor stations, high-speed surge detection |
| Marine | Naval propulsion exhaust monitoring |
Comparison
| Feature | DS3800HMPK | DS3800HMPJ1B1D | DS3800HMAC1H1F |
|---|---|---|---|
| ADC | 24-bit (21 eff.) | 20-bit (18 eff.) | 18-bit (16.8 eff.) |
| Accuracy | ±0.02% | ±0.035% | ±0.04% |
| CJC | ±0.15°C | ±0.2°C | ±0.4°C |
| Sampling | 2000 Hz | 1000 Hz | 1000 Hz |
| Firmware | JTAG+USB+Ethernet | JTAG+USB | JTAG |
| Diag. | AI-based predictive | Predictive health | Advanced+ |
| MTBF | 350k hrs | 295k hrs | 280k hrs |
Selection
| Scenario | Choice |
|---|---|
| New flagship EGT system | DS3800HMPK – ultimate performance. |
| Need outputs | Use DS3800HMAC1H1F. |
| TMR | Three identical HMPK modules. |
| Non-GE | Do not use – VME only. |
Critical Precautions
-
Authenticate – Check GE hologram, serial number.
-
ESD – Wear grounded wrist strap.
-
Backplane – Verify +5V, +15V, -15V before insertion.
-
Wiring – Must use TC-grade extension wire. Shielded cable, ground one end only.
-
Torque – 0.5-0.6 Nm.
-
CJC – Avoid heat sources near terminal block.
-
Temp – Keep rack <70°C.
-
Warm-up – Allow 30 minutes for CJC stabilization.
-
Firmware – Verify Mark V V5.06+ compatibility.
-
Sourcing – Authorized GE distributors only.
Final Summary
The General Electric DS3800HMPK is the ultimate dedicated thermocouple input module for GE Speedtronic systems, offering 24-bit ADC, ±0.02% accuracy, ±0.15°C CJC, 2000Hz sampling, and AI-based predictive diagnostics. It significantly outperforms HMPJ series and all universal modules. For new flagship EGT builds, DS3800HMPK is the definitive choice. Source from authorized channels.
Ӣ PMU-D21
Siemens 6ES5376-1AA21
Ѹ 591887
Reviews
There are no reviews yet.