Description
Technical Parameters
Manufacturer: GE
Series: Mark V / Mark VIe
Channels: 16 differential
Input Range: -10 mV to +100 mV (Type J/K/T/E)
Cold Junction: Single onboard sensor with enhanced linearization and thermal isolation
Isolation: 1500V AC
Accuracy: ±0.08% at 25°C, ±0.15% across full temperature range
Sampling: 10 Hz sequential
Operating Temp: -30°C to +70°C
Storage Temp: -40°C to +85°C
Mounting: VME rack
Suffix “F1BBF”: High accuracy + advanced diagnostics (drift, degradation, sense-lead integrity) + G1/F-series wiring configuration + extended temperature range + “BF” coating package (enhanced conformal coating offering good moisture resistance and mild chemical protection)
Key Features
High accuracy – ±0.08% for critical temperature monitoring
Advanced diagnostics – drift monitoring, degradation prediction, sense-lead integrity, and open/short detection
Faster sampling – 10 Hz for responsive monitoring
Extended temperature range – operates up to 70°C for hotter cabinets
“BF” enhanced coating – good moisture resistance and mild chemical protection
Improved cold-junction compensation – stable readings across ambient variations
Simple swap – no firmware changes required in most Mark V systems
LED status per channel + board health with diagnostic indicators
Backward compatible with Mark V and Mark VIe (hot-swap only on VIe Rev D+)
Applications
Gas turbine EGT monitoring – high accuracy with predictive diagnostics for early fault detection
Steam turbine bearing and casing temperatures – critical protection with drift anticipation
Generator stator cooling monitoring – precise measurements with diagnostic assurance
HRSG temperature measurements – enhanced reliability for efficiency-critical points
Critical compressor applications – where sensor degradation cannot be tolerated
Comparison with Competitors
| Feature | DS200TCQAF1BBF |
ABB TTH300 | Siemens 7KG7750 |
|---|---|---|---|
| Channels | 16 | 8 | 12 |
| Accuracy | ±0.08% | ±0.10% | ±0.12% |
| Sampling | 10 Hz | 10 Hz (simultaneous) | 8 Hz (simultaneous) |
| Diagnostics | Drift + degradation + open/short | Group-level | Per-channel + HART |
| Temp Range | -30°C to +70°C | -25°C to +65°C | -20°C to +60°C |
| Coating Type | “BF” enhanced | Standard acrylic | Standard acrylic |
| Moisture Resistance | Good | Moderate | Moderate |
| Hot-Swap | No (V) / Yes (VIe) | No | Yes |
| GE Native Integration | Yes | No | No |
Selection Tips
Choose the DS200TCQAF1BBF if you need high accuracy (±0.08%), advanced diagnostics, extended temperature range (70°C), and enhanced coating protection in a G1/F-series cabinet
For similar features with standard coating, consider DS200TCQAF1B (if available)
For severe chemical exposure, upgrade to PTFE or military-grade coatings if available in this series
For 4-wire long-distance needs with diagnostics, consider DS200TCDAH1BGD (lower accuracy at ±0.10%)
Verify existing wiring configuration – confirm G1/F-series terminal mapping
Source refurbished units with diagnostic test validation and coating inspection verification
Precautions
ESD sensitive – use wrist strap
Power down for Mark V removal (no hot-swap)
Torque terminals to 0.5 N·m max
Do not exceed -30°C to +70°C operating range – exceeding 70°C reduces component life
Avoid damaging the coating – scratches compromise protection
Use isopropyl alcohol only for cleaning – “BF” coating may resist some solvents but avoid acetone/MEK
Calibrate every 24 months – diagnostics depend on a valid baseline calibration
Ground shields only at the board end
Verify thermocouple type – optimized for J/K (T/E reduces accuracy to ±0.15%)
Monitor diagnostic logs – drift warnings indicate sensor aging; plan proactive replacement
Label clearly – mark board and slot as “TCQAF1BBF – DIAG/COATED” to ensure proper handling
A-B 1746-OAP12
A-B 1326AB-B720F-S2K7L
BENTLY PWB78434-01
Reviews
There are no reviews yet.