GE DS200TBPAG1A

Technical Parameters

Based on the Mark V DS200 series specifications, the DS200TBPAG1A features the following key parameters:

• Primary Function: General-Purpose Termination Board for Discrete and Analog Signals

• Terminal Channels: 16 configurable termination channels

• Signal Types Supported: Discrete inputs (24V DC, dry contact), Discrete outputs (relay/SSR control), Analog inputs (4-20mA, 0-10V)

• Terminal Type: Screw-type terminal blocks (accepts 0.5-2.5mm² wire, AWG 20-14)

• Voltage Rating: 300V AC/DC maximum

• Current Rating: 10A per terminal (maximum)

• Isolation: No active isolation (passive termination); relies on connected modules for isolation

• Form Factor: Single-slot 6U Eurocard (160mm), 96-pin DIN connector to backplane

• Mounting: Direct plug-in to Mark V rack; front-facing screw terminals for field wiring

• Operating Environment: 0°C to 60°C ambient temperature, 5% to 95% non-condensing humidity

• Labels: Clearly marked channel designations with type selection guides

• Compliance: UL recognized, CE marked

Advantages and Features

The DS200TBPAG1A offers several distinctive advantages for Mark V system field wiring:

1. Versatile Signal Support: The DS200TBPAG1A accepts discrete inputs, discrete outputs, and analog signals in a single board, reducing the need for multiple specialized termination boards.

2. High-Density Termination: With 16 channels, the DS200TBPAG1A provides efficient termination for mixed signal types in a compact footprint.

3. Screw-Type Terminals: Uses reliable screw-type connections that accommodate 0.5-2.5mm² wire, ensuring secure, long-term field connections.

4. Passive Design: Contains no active electronics, making the DS200TBPAG1A highly reliable and immune to electronic failures.

5. Direct Rack Integration: Plugs directly into the Mark V backplane, providing a clean, organized interface.

6. Hot-Swap Capable: Supports live insertion and removal with proper ESD protocols.

7. Clear Labeling: Each channel is clearly marked, reducing wiring errors.

Application Cases in Application Fields

The DS200TBPAG1A is deployed across multiple heavy-industrial sectors:

• Combined Cycle Power Plants: A 750MW CCPP facility uses the DS200TBPAG1A to terminate discrete inputs (valve position switches, limit switches), discrete outputs (solenoid valve controls), and analog signals (pressure transmitters) in a single board, simplifying cabinet design.

• Steam Turbine Retrofits: During a control system refurbishment, a facility installed the DS200TBPAG1A for mixed signal termination, reducing the required board count from three specialized boards to one.

• Gas Pipeline Compressor Stations: The DS200TBPAG1A terminates discrete and analog signals for compressor control and monitoring applications.

• Offshore Oil Platforms: The versatile signal support of the DS200TBPAG1A has proven valuable on offshore platforms where cabinet space is limited.

Comparison with Competing Products

Selection Suggestions and Precautions

Before purchasing or installing the DS200TBPAG1A:

• Verify Exact Model: Ensure the board is precisely DS200TBPAG1A, not DS200TBPAG1B or other variants. Different suffixes may have different channel configurations or signal support.

• Confirm Signal Types: Ensure your field signals (discrete inputs, discrete outputs, analog) match the DS200TBPAG1A termination capabilities.

• Channel Planning: With 16 channels, plan your signal allocation carefully. The DS200TBPAG1A can mix signal types, but each channel must be correctly wired to the corresponding module.

• Wiring Check: Inspect field wiring for proper insulation and polarity.

• Shielding: For analog signals, use shielded twisted-pair cables and connect the shield at the DS200TBPAG1A end only.

• ESD Protection: Use grounded wrist straps during handling.

• Post-Installation Validation:

  • Verify all terminations are mechanically secure.

  • Confirm correct wiring for each signal type.

  • Verify signal readings at the HMI match expected values.

• Spare Strategy: Maintain at least one spare DS200TBPAG1A on-site.

• Supplier Qualification: Request visual inspection and mechanical integrity verification before shipment.

Final Recommendation

For GE Mark V turbine systems requiring versatile, mixed-signal field wiring termination, the DS200TBPAG1A is the optimal solution. Its 16-channel capacity, support for discrete and analog signals, and reliable screw-terminals provide efficient, flexible signal routing in a compact footprint. Prioritize reputable aftermarket suppliers offering visually inspected units. Maintain spares on-site, plan signal allocation carefully, and ensure correct wiring to guarantee the long-term reliability of your DS200TBPAG1A and the entire Mark V control system.