Description
The GE 369B1860G0028 is a critical component from the GE Multilin series, specifically identified as a printed circuit board (PCB) assembly. It serves as a core processing or interface module within a GE Multilin protective relay, such as the 369 Motor Management Relay or a similar device in the series. This module is responsible for executing protection algorithms, managing communications, and interfacing with current transformers (CTs) and voltage transformers (VTs) to safeguard industrial motors and equipment.
Product Description
The GE 369B1860G0028 is an integral internal assembly that forms the operational brain of a protective relay. Its primary function is to process analog signals from field sensors, execute complex protection and management logic, and control output relays to isolate faulty equipment. Integrating the GE 369B1860G0028 as a replacement module restores the full analytical and protective capabilities of a failed relay unit. This board typically contains the main microprocessor, memory, analog-to-digital converters, and communication controllers. For maintenance technicians and protection engineers, sourcing the GE 369B1860G0028 is a targeted repair strategy that can restore a critical protection device without replacing the entire unit. The reliability of the motor protection system hinges on the flawless operation of this internal assembly. Proper installation and configuration of the GE 369B1860G0028 are essential for ensuring the relay meets its specified protection curves and communication functions.
Product Parameters
-
Manufacturer: GE Grid Solutions (Multilin product line).
-
Product Family: Likely associated with the GE Multilin 369 series or a similar motor management relay.
-
Model: 369B1860G0028 (GE Internal Assembly/PCB Number).
-
Function: Main Processor Board or Critical Interface Board within a protective relay.
-
Key Components: Microprocessor, firmware ROM, RAM, signal conditioning circuitry, and communication chips (for Ethernet, Modbus, etc.).
-
Compatibility: Designed exclusively for a specific relay model and hardware version. It is not interchangeable across different relay families.
-
Firmware: Requires specific relay firmware to be loaded for proper functionality.
Advantages and Features
-
Cost-Effective Repair: Allows for the repair of an expensive protective relay by replacing a single failed internal assembly, rather than the entire device, saving significant cost.
-
Preserves Configuration & Calibration: When installed into an existing relay housing, it can often retain or accept the relay’s stored configuration and calibration settings, minimizing recommissioning time.
-
Genuine OEM Performance: As a genuine GE component, the GE 369B1860G0028 ensures that the relay will perform exactly to its original specifications, maintaining all safety certifications and protection curves.
-
Restores Full Functionality: Replaces the core computing element, effectively returning the relay to a “like-new” operational state from a processing standpoint.
-
Sustainable Practice: Supports repair-over-replace initiatives, extending the lifecycle of critical industrial assets.
Application Cases in Industry
-
Mining & Minerals: Critical for protecting high-value, high-power slurry pumps, crushers, and conveyor motors from faults like overload, phase imbalance, locked rotor, and ground faults.
-
Oil & Gas: Protecting injection pumps, compressors, and fan motors on offshore platforms and refineries where unscheduled downtime is extremely costly.
-
Water & Wastewater: Safeguarding critical pump and aeration blower motors in treatment plants to ensure continuous operation and process stability.
-
Power Generation: Used for protecting boiler feed pumps, induced draft (ID) and forced draft (FD) fans, and other large auxiliary motors within power plants.
Comparison with Competing Products
Competing motor protection relays from manufacturers like SEL (SEL-700 series), Siemens (SIPROTEC), or ABB (CMA/CP-S) have their own proprietary internal assemblies. There is no direct cross-compatibility. The primary advantage of the GE 369B1860G0028 is that it is the only component that will guarantee the correct and certified operation of the specific GE Multilin relay it was designed for. Compared to using a completely different brand of relay, this spare part allows plants to maintain consistency in their protection philosophy, spare parts inventory, and technician training. It is a precise surgical repair versus a system overhaul.
Selection Suggestions and Precautions
-
Exact Relay Model Match: This part number is hyper-specific. You must verify it is listed as the correct assembly for your exact relay model (e.g., 369-HI-R-M-F-H) and hardware revision. This information is found on the relay’s factory label and in the technical manual.
-
Firmware Transfer/Update: The new GE 369B1860G0028 board may come blank or with base firmware. You will need to load the correct firmware version using GE’s EnerVista software. It is crucial to have a backup of the original relay’s configuration file (.cfg) to restore settings.
-
Expert Installation Required: Replacing an internal PCB requires skilled technicians familiar with electrostatic discharge (ESD) protocols. The relay must be fully de-energized, and wiring must be safely isolated before opening the case.
-
Testing and Commissioning: After installation, the relay must undergo thorough functional testing. This includes verifying CT/VT inputs, testing protection elements by injection, and confirming communication and output relay operation. Do not assume plug-and-play operation.
-
Source from Authorized Suppliers: To avoid counterfeit boards that could fail to operate correctly or compromise safety, procure the GE 369B1860G0028 only from GE or its authorized distributors specializing in Multilin protection equipment.
ABB 5STP03D6500
5STP03D6501 ABB PLC
ABB 5SDA06D5007
5STP52U5200 ABB PLC
ABB T918-2000-18NKO PLC
5STP2665N0019 PLC
Reviews
There are no reviews yet.