Description
Product Description
The GE 369B1859G0021 is a critical Power Supply Module designed for the GE Multilin 369 Motor Management Relay, a sophisticated device used for the protection, control, and monitoring of medium-voltage motors. This specific module, the GE 369B1859G0021, provides the regulated, low-voltage DC power required to operate the relay’s internal electronics, including its microprocessor, communication chips, and input/output circuits. The primary function of this power supply is to convert the incoming control voltage (typically 100-240V AC/DC) into the stable, isolated voltages necessary for reliable relay operation. The performance and integrity of the GE 369B1859G0021 are fundamental to the entire motor protection system, as any failure can lead to a loss of protection and an unplanned shutdown.
Product Parameters
The technical specifications for the GE 369B1859G0021 power supply module are engineered for industrial reliability:
-
Module Type: Internal Power Supply for GE Multilin 369 Relay.
-
Input Voltage Range: Designed to accept a wide range of input control power, commonly 85-265 VAC, 50/60 Hz, and 100-250 VDC. This ensures compatibility with various plant control voltages.
-
Output Voltages: Provides one or more isolated, regulated DC output voltages (e.g., +5V, ±12V, +24V) to power the relay’s internal logic boards, display, and communication circuits.
-
Output Power Rating: Rated to deliver sufficient current (in watts or amperes) to support all internal functions of the 369 relay, including connected communication options.
-
Protection Features: Incorporates internal protection against input over-voltage, under-voltage, and short-circuit conditions on its outputs.
-
Isolation: Provides high-voltage isolation (e.g., 1500 VAC) between the input power terminals and the low-voltage outputs/relay chassis for safety and noise immunity.
-
Form Factor: Designed as a plug-in card or assembly that installs within a dedicated slot or area inside the GE Multilin 369 relay housing.
-
Certifications: Complies with relevant safety (UL, CE) and EMC standards for industrial equipment.
Advantages and Features
The GE 369B1859G0021 power supply offers distinct advantages for motor protection systems:
-
Wide Input Range: The broad acceptable input range of the GE 369B1859G0021 makes it highly adaptable to different site power sources, simplifying spare parts inventory and commissioning.
-
High Reliability and Stability: Engineered for continuous, high-availability service, it provides clean and stable power to the sensitive relay electronics, which is crucial for accurate metering and protection timing.
-
Integrated Design: As a genuine GE component, the 369B1859G0021 is mechanically and electrically designed to fit perfectly and operate optimally within the 369 relay, ensuring proper thermal management and connectivity.
-
Maintenance Simplicity: Being a modular, field-replaceable unit, it allows for quick restoration of relay functionality in the event of a power supply failure, minimizing motor downtime.
-
Full System Compatibility: Guarantees full functionality with all relay features and communication options (Ethernet, Modbus, etc.), which might not be assured with a non-OEM or repaired unit.
Application Cases in Industry
This power supply module is essential wherever a GE Multilin 369 relay is deployed for critical motor protection:
-
Oil & Gas (Upstream/Midstream): Powers the 369 relay protecting large gas reinjection compressors or crude oil pipeline booster pumps.
-
Mining & Minerals: Provides reliable control power to the motor management relay on critical grinding mill motors and large conveyor drives.
-
Water & Wastewater Treatment: Ensures continuous operation of the protection relay on high-head pump motors in treatment plants and pumping stations.
-
Power Generation (Auxiliary Systems): Used in relays protecting induced draft (ID) fans, forced draft (FD) fans, and boiler feed pumps within power plants.
-
Chemical Processing: Supports the relay monitoring and protecting agitator motors and reactor charge pumps in batch and continuous processes.
Comparisons with Competing Products
When compared to universal power supplies or third-party replacement units, the GE 369B1859G0021 provides significant system-specific value:
-
Guaranteed Form, Fit, and Function: A generic power supply cannot match the exact mechanical dimensions, connector type, and mounting of the OEM GE 369B1859G0021, making integration difficult or impossible.
-
Preserved Relay Performance and Certification: The power supply’s electrical characteristics (ripple, noise, transient response) are integral to the relay’s metering accuracy and protection response times. Using a non-specified supply can degrade performance and void certifications.
-
Seamless Integration with Relay Firmware: The relay’s internal diagnostics may monitor the health of the OEM power supply. A third-party unit may not support these diagnostics, leading to a loss of predictive maintenance capability.
-
Assured Safety and Agency Approvals: The original 369B1859G0021 is part of the relay’s overall safety certification. Substituting it with an unapproved component can compromise the system’s safety ratings.
Selection Suggestions and Precautions
Proper handling and verification are crucial for a successful replacement:
-
Exact Part Number Match: The part number 369B1859G0021 must be matched exactly. Verify it against the sticker on the failed power supply and the relay’s parts list. Even minor suffix changes can indicate a different revision.
-
Verify Relay Hardware Version: Ensure the power supply is compatible with your specific 369 relay hardware version (e.g., series). Consult GE publication GEK-116294 or similar for compatibility matrices.
-
De-Energize and Discharge: Before replacement, completely isolate the relay from ALL power sources—both high-voltage input and control power. Wait the recommended time for internal capacitors to discharge.
-
Handle as ESD-Sensitive: Use proper electrostatic discharge (ESD) precautions when handling the new GE 369B1859G0021 module. Handle by the edges and use an anti-static wrist strap.
-
Perform Functional Tests: After installation, perform thorough relay functional tests, including verifying communication, meter readings, and input/output operations, to ensure the new power supply is operating correctly.
MAC112D-0-FD-2-C/130-A-2/S013 PLC
Kontron CP369, 31.263-1010.1 B/00 PLC
4PP420.0571-45 PLC
DSQC679 PLC
AIP444-S1 PLC
Reviews
There are no reviews yet.