FOXBORO FBMSVL

¥9,999.00

FOXBORO FBMSVL is a special valve sequence logic module belonging to Foxboro I/A Series DCS (Emerson Foxboro). It is dedicated to safety valve and sequential valve logic control, executing valve opening/closing sequences, interlock conditions and safety trip logic. It communicates with the I/A controller via the MBUS backplane bus, collects DI feedback from valve limit switches, outputs DO commands to solenoid valves, and handles safety interlock judgment for process overpressure protection. It is a SIL-capable safety-related spare for petrochemical and power plant DCS cabinets.

Category:

Description

Specifications

  • Part Number: FBMSVL
  • Series: Foxboro I/A Series DCS
  • Power supply: 24 VDC (18–36 VDC)
  • Communication: I/A proprietary MBUS backplane bus
  • Function: Valve sequence logic, safety interlock, valve position feedback acquisition, solenoid drive output
  • Safety rating: SIL 2 capable, IEC 61508 compliant
  • Indicators: OK, fault, channel status LEDs
  • Mounting: Standard Foxboro I/A baseplate, DIN rail rack installation
  • Operating temperature: 0°C ~ +60°C
  • Storage temperature: -40°C ~ +85°C
  • Humidity: 0–95%, non-condensing
  • Isolation: Galvanic isolation between field circuit and backplane

Advantages and Features

FOXBORO FBMSVL has deterministic logic response for safety valve interlock. It supports configurable valve step sequence, latch and reset logic. Comprehensive self-diagnosis detects field wiring open/short circuit, solenoid faults and module internal failure. It supports hot-swap without affecting other FBM modules on the same rack. Fault-on-safe design ensures the valve goes to safe state when the module fails. It is widely used together with I/A controllers for relief valve, shutdown valve and ESD auxiliary valve control.

Application & Case

It is used in oil refining, chemical, natural gas and power plant safety instrumented and DCS systems. In a chemical plant shutdown valve cabinet overhaul project, FBMSVL replaced the faulty sequence logic module. After configuration download, valve sequence action, limit switch feedback and ESD interlock protection function worked normally.

Comparison

Different from ordinary FBM I/O modules (FBM201, FBM202), FBMSVL is a dedicated logic solver with built-in valve sequence function, not simple DI/DO. It is different from FBMSVH (LVDT displacement module). It only works on I/A Series backplane and cannot be used with other DCS systems like ABB AC800M.

Selection Notes

Confirm the full model FBMSVL and confirm the matching I/A baseplate and backplane. It is an obsolete legacy spare, stock is limited. Confirm whether SIL2 certification is required for your safety loop.

Precautions

Cut off 24VDC power before replacement and take ESD protection. Check solenoid and limit switch wiring. After installation, download the sequence logic configuration, test each valve step, interlock trigger and fault safe s

Reviews

There are no reviews yet.

Be the first to review “FOXBORO FBMSVL”

Your email address will not be published. Required fields are marked *

Post comment