DS3800HCVA1F1G GE

Technical Specifications

• Product Type: High-Current Voltage Amplifier Board (Revision 1F1G)

• Part Number: DS3800HCVA1F1G

• Manufacturer: General Electric (GE)

• System Compatibility: GE Speedtronic Mark IV Turbine Control Systems (Rev. M and later)

• Output Channels: 4 independent analog outputs

• Output Type: Voltage (0-10V, ±10V, 0-24V, 0-48V, or 0-60V) – widest in series

• Drive Capability: Up to 1.2A per channel – absolute highest in Mark IV analog series

• Input Signal: ±10Vdc from Mark IV processor

• Gain: Selectable 1x, 2x, 5x, 10x, 20x, or 30x via jumpers

• Bandwidth: DC to 30kHz – widest in series

• Slew Rate: > 20V/µs – fastest in series

• Accuracy: ±0.1% of full scale at 25°C; ±0.007% per °C drift – best in series

• Protection: Over-current, short-circuit, and active thermal shutdown per channel

• Diagnostics: Individual channel fault detection (over-current, short-circuit, over-temperature, output drift, load impedance variation) with LED indication and backplane reporting

• Isolation: 2500Vrms reinforced isolation with enhanced common-mode transient immunity (> 150kV/µs) – highest in series

• Temperature Range: -40°C to +95°C – widest in series

• Heat Dissipation: Active thermal management with integrated heatsink, precision temperature sensor, and variable-speed cooling fan control output

• MTBF: > 220,000 hours (MIL-HDBK-217F)

Key Features & Advantages

• Maximum Drive Capability: The GE DS3800HCVA1F1G delivers up to 1.2A per channel – the highest current output of any Mark IV analog board.

• Widest Output Voltage Range: Supports 0-10V, ±10V, 0-24V, 0-48V, or 0-60V.

• Highest Gain Options: 1x, 2x, 5x, 10x, 20x, or 30x gain.

• Widest Bandwidth: DC to 30kHz for ultra-fast signal response.

• Fastest Slew Rate: > 20V/µs.

• Best Accuracy: ±0.007% per °C drift.

• Advanced Diagnostics: Fault detection (over-current, short-circuit, over-temperature, output drift, load impedance variation) with LED and backplane reporting.

• Active Thermal Management: Variable-speed fan control ensures sustained high-current operation.

• Highest Transient Immunity: > 150kV/µs for superior noise rejection.

• Widest Temperature Range: -40°C to +95°C.

Typical Application Cases

• Piezoelectric Actuator Drive: Drives high-power piezoelectric actuators.

• High-Voltage Valve Positioners: Controls positioners requiring 0-60V inputs.

• Ultra-Long-Distance Signal Transmission: Drives signals over cable runs > 1500m.

• Electrostatic Precipitator Control: Provides high-voltage control signals.

• Extreme Environment Installations: Suits offshore, arctic, or desert sites.

Competitive Comparison

The GE DS3800HCVA1F1G is the absolute pinnacle of the HCVA series, offering the highest current, widest bandwidth, fastest slew rate, best accuracy, and broadest environmental tolerance.

Selection Guidelines & Precautions

1. Output Voltage Selection: Configure jumper for 0-10V, ±10V, 0-24V, 0-48V, or 0-60V.

2. Gain Selection: Set gain (1x, 2x, 5x, 10x, 20x, or 30x).

3. Load Verification: Ensure current does not exceed 1.2A.

4. Thermal Management: Connect fan control output to cabinet cooling fan (24Vdc, < 500mA).

5. Diagnostic Reporting: Requires Mark IV firmware Rev. M or later.

6. Wiring: Use shielded cables; ground shield at board end only.

7. ESD Handling: Use ESD-safe practices.

8. Sourcing: Obsolete. Request functional test report including all channels tested at all voltage ranges and gains, plus diagnostic validation.

9. Spare Strategy: Keep one spare GE DS3800HCVA1F1G on-site for critical high-voltage applications. If unavailable, the DS3800HCVA1F1D is a compatible alternative with reduced specifications. Proactive replacement after 10 years is recommended.