DS3800HCIC1E1E GE

Technical Specifications

• Product Type: High-Current Input Conditioning Board (Revision 1E1E)

• Part Number: DS3800HCIC1E1E

• Manufacturer: General Electric (GE)

• System Compatibility: GE Speedtronic Mark IV Turbine Control Systems (Rev. M and later)

• Input Channels: 16 high-current digital inputs

• Input Type: Sourcing or sinking (jumper-selectable per channel)

• Input Voltage Range: 24Vdc, 48Vdc, or 125Vdc (jumper-selectable)

• Input Current: Up to 75mA per channel – absolute maximum in series

• Input Impedance: Selectable 10kΩ, 5kΩ, 2.5kΩ, 1.2kΩ, or 600Ω (jumper-selectable) – widest range

• Input Threshold: 15V (on) / 5V (off) for 24V mode; 30V/10V for 48V; 80V/25V for 125V

• Filtering: Programmable 1ms, 5ms, 10ms, 50ms, 100ms, or 200ms debounce filter (jumper-selectable) – widest range

• Protection: Over-current, reverse-polarity, transient protection (enhanced TVS), and input filtering

• Diagnostics: Individual channel fault detection (over-current, open-circuit, stuck-on/stuck-off, input voltage monitoring, channel health, impedance variation) with LED indication and backplane reporting

• Isolation: 2500Vrms reinforced opto-isolation with enhanced common-mode transient immunity (> 120kV/µs) – highest in series

• Temperature Range: -40°C to +90°C – widest in series

• MTBF: > 300,000 hours (MIL-HDBK-217F)

Key Features & Advantages

• Maximum Drive Capability: The GE DS3800HCIC1E1E accepts up to 75mA per input, providing the highest margin for the most demanding long cable runs and high-power field devices.

• Widest Filtering Range: Programmable debounce filtering from 1ms to 200ms eliminates contact bounce and electrical noise in the most challenging environments.

• Broadest Impedance Selection: Five impedance options (10kΩ, 5kΩ, 2.5kΩ, 1.2kΩ, 600Ω) allow optimization for extreme noise immunity or current consumption.

• Most Advanced Diagnostics: Individual channel fault detection (over-current, open-circuit, stuck-on/stuck-off, input voltage monitoring, channel health, impedance variation) with LED and backplane reporting for predictive maintenance.

• Highest Transient Immunity: > 120kV/µs common-mode transient immunity for superior noise rejection.

• Widest Temperature Range: -40°C to +90°C suits the most extreme environments.

• Widest Input Voltage Range: Supports 24Vdc, 48Vdc, or 125Vdc, compatible with various plant power systems.

Typical Application Cases

• Proximity Switch Interfacing: Interfaces with high-current proximity sensors and limit switches with advanced noise filtering.

• Relay Contact Monitoring: Monitors field relay contacts with configurable debounce filtering.

• Ultra-Long-Distance Signaling: Supports input signals from devices located > 1500m away.

• Motor Starter Feedback: Monitors auxiliary contacts from motor starters and contactors.

• Extreme Environment Installations: Widest temperature range suits offshore, arctic, or desert sites.

• High-Noise Environments: Enhanced impedance and filtering options for VFD-heavy installations and arc furnace areas.

Competitive Comparison

The GE DS3800HCIC1E1E is the absolute pinnacle of the HCIC series, offering the highest current, widest filtering and impedance range, most advanced diagnostics, and broadest environmental tolerance.

Selection Guidelines & Precautions

1. Input Voltage Selection: Verify field device voltage. Configure jumpers for 24V, 48V, or 125Vdc.

2. Sourcing/Sinking Selection: Set per channel to match your field device wiring.

3. Impedance Selection: Select 10kΩ for standard, 5kΩ for moderate noise, 2.5kΩ for high noise, 1.2kΩ for extreme noise, or 600Ω for maximum noise immunity (higher current consumption).

4. Filter Selection: Set debounce filter: 1ms for fast signals, 50ms for standard contacts, 100ms for noisy contacts, or 200ms for very slow or extremely noisy contacts.

5. Cable Length: Supports cables up to 1500m. For longer runs, verify voltage drop.

6. Diagnostic Reporting: Requires Mark IV firmware Rev. M or later for full diagnostic support.

7. Channel Health & Impedance Monitoring: Familiarize yourself with fault codes for channel health and impedance variation diagnostics.

8. Wiring: Use shielded twisted-pair cables; ground shield at board end only.

9. Commissioning: Verify input voltage and current with a multimeter. Test each channel with a simulated input.

10. ESD Handling: Use ESD-safe practices.

11. Sourcing: Obsolete. Request functional test report including:

    • All 16 channels tested at 24V, 48V, and 125V

    • Threshold verification

    • Filter verification at all settings (1ms to 200ms)

    • Impedance verification (10k/5k/2.5k/1.2k/600Ω)

    • Diagnostic reporting validation (including channel health and impedance variation)

    • Transient immunity test (> 120kV/µs)

    • Isolation test (2500Vrms)

12. Spare Strategy: Keep one spare GE DS3800HCIC1E1E on-site for critical input monitoring applications. This is the ultimate choice for the most demanding harsh and high-noise environments. If unavailable, the DS3800HCIC1D1D is a compatible alternative with reduced specifications. Proactive replacement after 10 years of continuous operation is recommended.