DS2020ERCAG1 GE

Technical Parameters

Manufacturer: GE
Series: Mark V / Mark VIe
Channels: 16 differential
Input Range: -10 mV to +100 mV (Type J/K/T/E)
Cold Junction: Single onboard sensor with enhanced linearization and thermal isolation
Isolation: 1500V AC
Accuracy: ±0.08% at 25°C, ±0.15% across full temperature range
Sampling: 10 Hz sequential
Operating Temp: -30°C to +65°C
Storage Temp: -40°C to +85°C
Mounting: VME rack
Suffix “G1”: Enhanced accuracy (0.08%) + advanced diagnostics (drift, degradation, sense-lead integrity) + G1 wiring + standard conformal coating

Advantages & Key Features

The DS2020ERCAG1 offers high precision with advanced diagnostic capabilities. Key advantages include:

High Accuracy – ±0.08% for critical temperature monitoring.
Advanced Diagnostics – Drift monitoring, degradation prediction, sense-lead integrity checks, and open/short detection.
Faster Sampling – 10 Hz for responsive monitoring.
Enhanced Cold-Junction Compensation – Stable readings across ambient variations.
G1 Wiring Configuration – Standard channel-to-terminal mapping matching most GE cabinets.
Simple Swap – No firmware changes required in most Mark V systems.
LED Status – Per-channel + board health with diagnostic indicators.
Standard Conformal Coating – Moisture and dust resistance.
Backward Compatibility – Compatible with Mark V and Mark VIe (hot-swap only on VIe Rev D+).

Application Cases

This board is ideal for applications requiring high accuracy with predictive diagnostics:

Gas Turbine EGT Monitoring – High precision with early fault detection for improved reliability.
Steam Turbine Bearing & Casing Temperatures – Critical protection with drift anticipation.
Generator Stator Cooling – Accurate monitoring with diagnostic assurance.
Compressor Performance Monitoring – Where sensor degradation cannot be tolerated.
HRSG Temperature Measurement – Enhanced reliability for efficiency-critical points.

Comparison with Competitors

Selection Tips

Choose the DS2020ERCAG1 if you need high accuracy (±0.08%) and advanced diagnostics (drift/degradation) with G1 wiring in a standard temperature environment.
For the same features with extended temperature range (70°C), consider DS2020ERCAG1B (if available).
For enhanced coating protection with similar specs, consider DS2020ERCAG1 with specialized coating suffix (e.g., DS2020ERCAG1ABC or similar).
For basic accuracy without diagnostics, the DS2020TCRAG1 is more economical.
For 4-wire long-distance needs with diagnostics, consider DS2020TCDAH1BGD (lower accuracy at ±0.10%).
Verify existing wiring is 2-wire standard – G1-series terminal mapping applies.
Source refurbished units with diagnostic test validation.

Precautions

ESD Sensitive – Use wrist strap.
Power Down for Mark V removal (no hot-swap).
Torque Terminals to 0.5 N·m max.
Do Not Exceed -30°C to +65°C operating range.
Calibrate Every 24 Months – Diagnostics depend on a valid baseline calibration.
Ground Shields only at the board end.
Verify Thermocouple Type – Optimized for J/K (T/E reduces accuracy to ±0.15%).
Monitor Diagnostic Logs – Drift warnings indicate sensor aging; plan proactive replacement.
Label Clearly – Mark as “ERCAG1 – DIAG” to ensure proper handling and maintenance tracking.