DS200TCQAG1ADE GE

Technical Parameters

Manufacturer: GE
Series: Mark V / Mark VIe
Channels: 16 differential
Input Range: -10 mV to +100 mV (Type J/K/T/E)
Cold Junction: Single onboard sensor with enhanced linearization and improved thermal isolation
Isolation: 1500V AC
Accuracy: ±0.08% at 25°C, ±0.15% across full temperature range
Sampling: 10 Hz sequential
Operating Temp: -30°C to +65°C
Storage Temp: -40°C to +85°C
Mounting: VME rack
Suffix “G1ADE”: High accuracy + advanced diagnostics (drift, degradation, sense-lead) + G1 wiring + enhanced cold-junction compensation + “DE” premium coating (high-grade urethane or silicone blend offering excellent moisture barrier, good-to-high chemical resistance, and moderate solvent resistance)

Key Features

High accuracy – ±0.08% for critical temperature monitoring
Advanced diagnostics – drift monitoring, degradation prediction, sense-lead integrity, and open/short detection
Improved cold-junction compensation – better linearization across ambient variations
“DE” premium coating – excellent moisture resistance, good-to-high chemical protection, and moderate solvent resistance; suitable for harsh environments
Faster sampling – 10 Hz for responsive monitoring
G1 wiring configuration – standard channel-to-terminal mapping
Simple swap – no firmware changes required in most Mark V systems
LED status per channel + board health with diagnostic indicators
Backward compatible with Mark V and Mark VIe (hot-swap only on VIe Rev D+)

Applications

Chemical processing plants – premium coating protects against solvents and chemicals while diagnostics ensure reliability
Coastal power plants with heavy salt spray – excellent moisture barrier with enhanced performance
Paper and pulp mills – harsh chemical environments with humidity and heat
Gas turbine EGT monitoring in corrosive environments – high accuracy with predictive diagnostics and improved stability
Compressor monitoring in chemically aggressive areas – noise rejection with environmental protection

Comparison with Competitors

Selection Tips

Choose the DS200TCQAG1ADE if you need high accuracy (±0.08%), advanced diagnostics, enhanced cold-junction compensation, and premium coating protection in a G1 cabinet – ideal for chemically aggressive environments requiring predictive maintenance
For the same features with standard coating, consider DS200TCQAG1A (less protection)
For severe chemical/corrosion exposure, upgrade to DS200TCQAG1AJE (military-grade) or DS200TCQAG1ATF (PTFE) if available
For extended temperature range (70°C) with similar features, consider DS200TCQAG1BDE (if available)
For 4-wire long-distance needs with diagnostics, consider DS200TCDAH1BGD (lower accuracy at ±0.10%)
Verify existing wiring is 2-wire standard – G1-series terminal mapping applies
Source refurbished units with coating inspection verification and diagnostic test validation

Precautions

ESD sensitive – use wrist strap
Power down for Mark V removal (no hot-swap)
Torque terminals to 0.5 N·m max
Do not exceed -30°C to +65°C operating range
Avoid damaging the coating – scratches compromise protection
Use isopropyl alcohol only for cleaning – “DE” coating resists many solvents but avoid acetone/MEK; confirm compatibility with GE documentation
Calibrate every 24 months – diagnostics and enhanced accuracy depend on a valid baseline calibration
Ground shields only at the board end
Verify thermocouple type – optimized for J/K (T/E reduces accuracy to ±0.15%)
Monitor diagnostic logs – drift warnings indicate sensor aging; plan proactive replacement
Label clearly – mark as “TCQAG1ADE – DIAG/ENH CJC/DE COAT” to ensure proper handling