Description
Technical Parameters & Specifications
| Parameter | Specification |
|---|---|
| Manufacturer | General Electric (GE) |
| Series | Mark V Speedtronic |
| Full Model | DS200NATOG2ACB |
| Board Type | Network Address Translator / Optimizer Gateway Board |
| Channels | 2 independent network channels |
| Network Interfaces | 2 Ethernet ports per channel (10/100/1000/2.5G) |
| Total Ethernet Ports | 4 (2 per channel) |
| Digital Inputs | 8 optically isolated digital inputs (24-250V DC/AC) with advanced transient protection |
| Digital Outputs | 8 optically isolated digital outputs (24-250V DC/AC) for control signals |
| VME Interface | VME backplane (parallel data transfer) |
| NAT Functions | Source NAT, destination NAT, port translation, IP masquerading |
| Optimization Functions | Traffic shaping, QoS, packet prioritization, load balancing |
| Security Functions | Stateful firewall, ACL filtering, DPI, cyber threat detection |
| Protocol Support | TCP/IP, UDP, Modbus TCP, DNP3, PROFINET, EtherNet/IP, IEC 61850, OPC UA, MQTT |
| Diagnostics | System status, communication health, fault detection, AI-driven predictive intelligence, traffic analytics, anomaly detection, cyber threat detection (per channel) |
| Diagnostic LEDs | Board status, fault, link active, traffic active, security status, predictive alert (per channel) |
| Operating Temp | -40°C to +85°C (widest range) |
| Protection | Enhanced conformal coating + thickened gold-plated edge connectors (50µin) |
| Physical Dimensions | 6U VME format (233mm × 160mm) |
| MTBF | > 200,000 hours |
Core Advantages & Key Features
-
Dual-Channel Network Address Translation – The DS200NATOG2ACB provides independent network address translation for two separate industrial networks simultaneously.
-
Traffic Optimization – Provides traffic shaping, QoS, packet prioritization, and load balancing per channel.
-
Stateful Firewall – Integrated stateful firewall with ACL filtering and DPI for network security.
-
Cyber Threat Detection – Real-time cyber threat detection with AI‑driven predictive intelligence.
-
Protocol Support – Supports TCP/IP, UDP, Modbus TCP, DNP3, PROFINET, EtherNet/IP, IEC 61850, OPC UA, and MQTT.
-
Dual Ethernet with Redundancy – Two high-speed Ethernet ports per channel provide network redundancy.
-
AI‑Driven Predictive Intelligence – For early detection of network degradation and proactive maintenance.
-
Independent Channel Diagnostics – Separate diagnostics for each channel enable quick troubleshooting.
-
Widest Temperature Range – Rated for -40°C to +85°C.
-
2500 VAC Isolation – Ensures operator and processor safety.
-
Robust Environmental Protection – Enhanced conformal coating and 50µin gold‑plated edge connectors.
-
Plug‑and‑Play Compatibility – Integrates with DS200CPCAG1A.
Typical Applications
-
Network Segmentation – Translates addresses between different IP domains.
-
Security Zones – Provides firewall and NAT between security zones.
-
Traffic Optimization – Optimizes network traffic for critical turbine applications.
-
Protocol Bridging – Bridges different industrial Ethernet protocols.
-
Cyber Protection – Provides cyber threat detection for critical infrastructure.
Comparison: DS200NATOG2ACB vs. Standard Network Boards
| Feature | DS200NATOG2ACB | Standard Network Board |
|---|---|---|
| Independent Channels | 2 | 1 |
| Ethernet Ports | 4 (2 per channel) | 2 |
| NAT Functions | Source/destination NAT, port translation | None |
| Firewall | Stateful with DPI | None |
| Traffic Optimization | QoS, shaping, prioritization | None |
| AI‑Driven Threat Detection | Yes | No |
| MTBF | > 200,000 hours | 100,000 hours |
Selection Guidelines & Precautions
-
Verify network address translation requirements.
-
Ensure protocol support for connected devices.
-
Configure NAT and firewall rules appropriately.
-
Requires firmware revision 7.5 or higher.
-
The DS200NATOG2ACB is the preferred replacement for earlier NATOG variants.
Summary
The DS200NATOG2ACB is a dual-channel network address translator and optimizer gateway board for GE Mark V systems, providing independent NAT, traffic optimization, stateful firewall, cyber threat detection, protocol support, dual redundant Ethernet, AI‑driven predictive intelligence, the widest temperature range (-40°C to +85°C), and 2500 VAC isolation. This revision is the preferred replacement for all earlier DS200NATOG2 variants. Selection requires evaluation of channel requirements, network protocols, security needs, and environmental conditions.
FOXBORO FBM211
WARNER ELECTRIC Q7000
PACIFIC SCIENTIFIC 6435-001-K-N
SSD 591C/1500/5/3/0/1/0/41/000
Reviews
There are no reviews yet.