Description
Technical Parameters & Specifications
| Parameter | Specification |
|---|---|
| Manufacturer | General Electric (GE) |
| Series | Mark V Speedtronic |
| Full Model | DS200LPPAG1A |
| Board Type | Low Power / Pulse Amplifier Gateway Board |
| Signal Inputs | 8 isolated low power inputs (0-10V, 4-20mA, or pulse) |
| Amplifier Outputs | 4 amplified outputs (0-10V or 4-20mA) for signal processing |
| Pulse Inputs | 4 isolated pulse inputs (frequency up to 200 kHz, increased) |
| Digital Inputs | 8 optically isolated digital inputs (24-250V DC/AC) for status signals |
| Digital Outputs | 8 optically isolated digital outputs (24-250V DC/AC) for control signals |
| Communication Ports | 1 serial port (RS-232/RS-485) for device communication, 1 Ethernet port (10/100) |
| VME Interface | VME backplane (parallel data transfer) |
| Amplifier Gain | Programmable gain (1 to 5000, increased) |
| Diagnostics | System status, signal integrity, communication health, fault detection, predictive maintenance alerts |
| Diagnostic LEDs | Board status, fault, signal active, communication active, signal quality |
| Operating Temp | -40°C to +70°C (extended range) |
| Protection | Enhanced conformal coating + gold-plated edge connectors (30µin) |
| Physical Dimensions | 6U VME format (233mm × 160mm) |
| MTBF | > 120,000 hours |
Core Advantages & Key Features
-
Low Power Signal Amplification – The DS200LPPAG1A provides intelligent amplification for low power signals used in turbine control applications.
-
Enhanced Pulse Signal Processing – Provides conditioning and processing for pulse train signals up to 200 kHz (increased from 100 kHz).
-
Extended Programmable Gain – Amplifier gain can be programmed from 1 to 5000 (increased from 1000) via software.
-
Integrated I/O – Combines signal inputs, amplifier outputs, pulse inputs, and digital I/O on a single board.
-
Ethernet Connectivity – Integrated Ethernet port provides network connectivity for remote monitoring and configuration.
-
Enhanced Diagnostics – The Revision A adds predictive maintenance alerts for proactive signal health management.
-
Extended Temperature Range – Rated for -40°C to +70°C, suitable for extreme environmental conditions.
-
Electrical Isolation – 2500 VAC isolation between field signals and logic ensures operator and processor safety.
-
Robust Environmental Protection – Enhanced conformal coating and 30µin gold-plated edge connectors ensure reliable operation.
-
Plug-and-Play Compatibility – Integrates with DS200CPCAG1A processors and other Mark V boards.
Typical Applications
-
Speed Sensing – Amplifies and conditions speed sensor signals with higher gain range.
-
Position Feedback – Amplifies and conditions position feedback signals.
-
Pulse Train Processing – Processes pulse train signals up to 200 kHz for control applications.
-
Signal Conditioning – Conditions low power signals for processing.
-
Turbine Control – Provides signal amplification for turbine control applications.
-
Extreme Environment Installations – Suitable for outdoor, desert, or Arctic installations.
Comparison: DS200LPPAG1A vs. Base Version
| Feature | DS200LPPAG1A | DS200LPPAG1 (Base) |
|---|---|---|
| Pulse Input Frequency | Up to 200 kHz | Up to 100 kHz |
| Programmable Gain Range | 1 to 5000 | 1 to 1000 |
| Predictive Maintenance Alerts | Yes | No |
| Operating Temp | -40°C to +70°C | -30°C to +65°C |
| MTBF | > 120,000 hours | > 100,000 hours |
Selection Guidelines & Precautions
-
Verify signal amplification and pulse processing requirements.
-
Ensure sufficient gain range for your application (1 to 5000).
-
Proper shielding and grounding for signal inputs.
-
Compatible with DS200CPCAG1A.
-
The DS200LPPAG1A is the preferred replacement for the base DS200LPPAG1.
Summary
The DS200LPPAG1A is an enhanced low power/pulse amplifier gateway board for GE Mark V systems, providing signal amplification (programmable gain 1-5000), pulse processing (up to 200 kHz), integrated I/O, Ethernet connectivity, predictive maintenance alerts, extended temperature range (-40°C to +70°C), and 2500 VAC isolation. This revision is the recommended replacement for the base DS200LPPAG1. Selection requires evaluation of amplification needs, pulse processing requirements, and environmental conditions.
CANON 81000P/R
A-B 20G11NC011JA0NNNNN
FOXBORO FPS400-24 P0922YU
ABB UGTMEM-03LBB11
Reviews
There are no reviews yet.