Description

Specifications
- Model: EKC 361
- Power supply: 24 VAC
- Control algorithm: PID with adaptive response
- Accuracy: ±0.25°C after stabilizationassets.dan…
- Sensors: Main medium temperature sensor Sair, optional auxiliary sensor Saux
- Inputs: Digital start/stop input, analog setpoint offset input
- Outputs: Analog modulating output for pilot valve CVQ/CVE; relay outputs for fan and liquid line solenoid valve
- Display: 3-digit LCD, °C / °F selectable
- Buttons: Two keys for parameter setting
- Mounting: Panel cut-out mounting
- Operating temperature: -20°C ~ +60°C
- Weight: approx 0.32 kgDanfoss Gl…
- Communication: Optional communication module RC8AC
Advantages and Features
Danfoss EKC 361 has three adaptive response curves for different application requirements: fast cooling with minor overshoot, gentle cooling with small fluctuation, and cooling without temperature overshootassets.dan…. It provides high and low temperature alarm functions, relay alarm output. It can control fan and liquid solenoid valve in linkage. It features simple menu structure and local fault code display for troubleshooting. It is widely used in cold storage, food refrigeration rooms requiring strict humidity control.
Application & Case
It is mainly used in food cold storage, supermarket refrigerated display cabinets and industrial refrigeration evaporator control loops. In a cold storage renovation project, EKC 361 replaced the old temperature controller; after parameter commissioning, evaporator temperature stabilized, humidity control and high/low temperature alarm worked normally.
Comparison
Compared with EKC 366 interface controller, EKC 361 is a standalone local temperature controller without relying on PLC analog output. It is dedicated to evaporator temperature control and cannot be used for compressor capacity control. EKC series models are not interchangeable.
Selection Notes
Confirm the full model EKC 361, confirm matching ICS/PM/ICM valve and CVQ/CVE pilot. This model is discontinued, spare stock is limited.
Precautions
Cut off 24VAC power before replacement. Check sensor polarity and wiring. After installation, set PID parameters, temperature setpoint and alarm limits, test fan, solenoid valve linkage and alarm output before putting into service.



Reviews
There are no reviews yet.