BENTLY 350033 149986-01

¥9,999.00

BENTLY 3500/33 149986-01 is the 16-channel relay module for the Bently Nevada 3500 TSI machinery protection rack. It converts alert, danger and module fault signals from monitoring cards into hard SPDT relay contacts, used for trip interlock, annunciator alarm and DCS remote signal transmission. It is installed in slots after the 3500/22M TDI module. Every relay channel supports independent AND/OR voting logic configuration, and it can realize 2-out-of-3 and other protection voting schemes for turbine, compressor and fan protection systems.

Category:

Description

Specifications

  • Part Number: 3500/33, 149986-01
  • Series: Bently Nevada 3500 machinery protection system
  • Relay: 16 epoxy-sealed SPDT relays
  • Contact rating: 5A @ 24VDC / 5A @ 120VAC
  • Relay grouping: divided into four groups of four channels; each group selectable for Normally Energized (NE) or Normally De-energized (NDE)
  • Power supply: Powered by rack backplane
  • Power consumption: approx 5.8 W
  • Indicators: OK, TX/RX, per-channel CH Alarm LEDs
  • Operating temperature: -30°C ~ +65°C
  • Storage temperature: -40°C ~ +85°C
  • Humidity: 0–95%, non-condensing
  • Mounting: Full-height slot inside 3500 rack

Advantages and Features

BENTLY 3500/33 149986-01 provides flexible programmable relay logic without external intermediate relays. It supports latching function for alarm channels. It has built-in communication diagnosis; the LED indicates communication status between the module and rack backplane. It is widely used together with 3500/40M, 3500/42M monitor cards to form complete protection output chains for large rotating equipment.

Application & Case

It is widely used in steam turbine, gas turbine, blower and compressor monitoring cabinets in power plants and petrochemical industries. In a thermal power TSI overhaul project, 3500/33 149986-01 replaced the faulty relay module. After configuration download, vibration alarm, shaft displacement danger trip and annunciator output worked normally.

Comparison

Compared with 3500/32M (4-channel relay module), 3500/33 has 16 channels for large I/O quantity requirements. Different 3500/33 rear I/O modules (149992 series) have different relay types and are not interchangeable. It does not collect probe signals; it is only an output module triggered by monitor cards. Generic relay modules cannot recognize the 3500 backplane communication protocol.

Selection Notes

Confirm the full part number 149986-01 and match the corresponding rear I/O board. It must be used in 3500 rack and cannot work independently. Not compatible with 1900 series monitors and old 3300 racks.

Precautions

Power off the rack and take ESD protection before replacement. After installation, download rack configuration, test each relay channel, verify voting logic, alarm latching and trip action, and confirm contact output before putting into service.

Reviews

There are no reviews yet.

Be the first to review “BENTLY 350033 149986-01”

Your email address will not be published. Required fields are marked *

Post comment