BENTLY 147663-01

Description

Product Overview

The BENTLY 147663-01 is a specialized vibration monitoring module, specifically a Velocity Seismoprobe or signal conditioning unit, from Bently Nevada’s machinery protection and condition monitoring portfolio. This device is designed to interface with a velocity sensor (seismoprobe) to measure casing or absolute shaft vibration in machinery. The BENTLY 147663-01 converts the raw signal from the velocity transducer into standardized, conditioned outputs suitable for monitoring systems, data collectors, or PLC/DCS inputs. It plays a crucial role in predictive maintenance and protection strategies for rotating equipment.

Key Product Parameters

• Product Type: Velocity Signal Conditioner / Seismoprobe Module

• Compatible Sensor: Pairs with Bently Nevada velocity transducers (e.g., a 147663-01 likely works with a specific seismoprobe sensor model).

• Input: Accepts the low-level AC signal from a velocity sensor, which outputs a signal proportional to vibration velocity (typically in units like in/sec or mm/sec).

• Outputs: Provides conditioned analog outputs, most commonly:

  • A 4-20 mA DC signal proportional to the overall vibration velocity (for connection to PLC/DCS).

  • A buffered raw velocity signal (AC output) for connection to diagnostic data collectors or analyzers.

• Power Supply: Requires an external DC power source, typically +18 to +30 VDC.

• Frequency Response: Optimized for the standard machinery vibration monitoring range (e.g., 10 Hz to 1,000 Hz or similar).

• Mounting: Typically a compact, DIN-rail mountable enclosure.

• Indicators: May include LED status indicators for power and signal.

Advantages and Core Features

The primary advantage of the BENTLY 147663-01 is its ability to provide a robust, industry-standard interface for reliable velocity vibration measurements. It conditions the sensor signal, amplifying it to a usable level and providing electrical isolation to protect monitoring system inputs from ground loops and transients. Its dual output capability is a key feature, allowing simultaneous connection for both continuous protection/monitoring (via the 4-20mA loop) and periodic diagnostic analysis (via the AC raw signal). The module is designed for high reliability and stable operation in the electrically noisy environment of industrial plants, ensuring accurate long-term trending.

Application Scenarios

This module is used to monitor vibration on machines where casing or absolute vibration is the key metric, often on slower-speed equipment or where shaft access is not possible:

• Pumps & Fans: Monitoring motor and pump casing vibration on critical cooling water pumps, boiler feed pumps, and large induced/forced draft fans in power plants and water facilities.

• Compressors: Measuring casing vibration on reciprocating and centrifugal compressors in oil & gas, chemical, and refrigeration plants.

• Motors & Gearboxes: Providing overall vibration monitoring for large motors, gearboxes, and other rolling element bearing-supported machinery.

• Paper & Rolling Mills: Monitoring vibration on large rolls, dryers, and other auxiliary machinery.

Comparison with Competing Products

Competing products include velocity signal conditioners from other vibration monitoring specialists like Emerson (CSI 9420), SKF (CMSS 786), and standalone conditioners from various suppliers. The BENTLY 147663-01 is distinguished by the Bently Nevada brand’s long-standing reputation in the high-reliability power generation and oil & gas sectors. Its performance is calibrated and validated to work seamlessly with Bently’s sensor lineup and monitoring systems. Compared to connecting a velocity sensor directly to a generic data acquisition card, the 147663-01 provides proper signal conditioning, isolation, and a standardized current output, greatly simplifying system integration and improving signal integrity.

Selection Guide and Important Notes

Selecting the BENTLY 147663-01 requires ensuring compatibility with the specific velocity sensor model and the requirements of the monitoring system’s input card.

Important Precautions:

• Sensor Compatibility: This module is designed for a specific type of velocity sensor (likely a 10 mV/in/sec or 100 mV/mm/sec sensitivity seismoprobe). Verify the exact sensor model it is intended to pair with.

• Power Supply Quality: Use a clean, regulated DC power supply. Noise on the power line will be injected into the sensitive vibration signal.

• Output Load: For the 4-20 mA output, ensure the total loop resistance (wiring plus input impedance of the PLC/DCS card) does not exceed the module’s maximum load specification (e.g., 600 Ω).

• Grounding & Shielding: Proper installation is critical. Use shielded cable for both the sensor connection and the output signals. Connect the shield at the 147663-01 end only to prevent ground loops.

• Calibration: For critical measurements, the entire loop (sensor + conditioner) should be periodically calibrated using a portable calibrator to ensure accuracy.

1746-ITB16 AB
1746-OW8 AB
1746-OB16 AB
1746-IB8 AB
1746-A10 AB