ABB YPQ110A 3ASD573001A5

Description

Introduction to the ABB YPQ110A 3ASD573001A5

Product Description

The ABB YPQ110A 3ASD573001A5 is a high-performance, solid-state soft starter from ABB’s renowned PSR, PSE, or PSS series, designed for controlling the acceleration and deceleration of three-phase AC induction motors. This specific model is rated for 110 Amperes, indicating its capacity to manage motors with corresponding power ratings. The ABB YPQ110A provides a controlled ramp-up of voltage and current to the motor, significantly reducing mechanical stress on the drive train and electrical stress on the power network compared to direct-on-line (DOL) starting. It helps limit inrush current, prevent water hammer in pump applications, and extend the life of motors and connected machinery. The article number 3ASD573001A5 identifies this exact production variant. As a key component in motor management, the YPQ110A 3ASD573001A5 enhances system reliability and efficiency.

Product Parameters

• Product Series: ABB Soft Starter (e.g., PSR, PSE, PSS series)

• Model: YPQ110A

• Article Number: 3ASD573001A5

• Device Type: Solid-State Soft Starter

• Rated Current: 110 Amperes (at a specified voltage, e.g., 380-480VAC).

• Motor Power: Suitable for three-phase induction motors up to a specific power rating (e.g., ~55 kW / 75 HP at 400V).

• Control Method: Voltage ramping with torque control or current limiting options.

• Voltage Rating: Designed for standard industrial three-phase voltages (e.g., 208-480VAC, 50/60 Hz).

• Protections: Integrated protections include overload, phase loss, phase reversal, and overtemperature.

• Control Interfaces: Includes digital inputs (start/stop), relay outputs (running, fault, etc.), and often a potentiometer or keypad for parameter setting.

• Enclosure: Typically an IP00 chassis model for cabinet mounting, or available in various enclosure ratings.

Advantages and Features

The primary advantage of the ABB YPQ110A 3ASD573001A5 is its ability to provide smooth, controlled motor starts and stops, which reduces wear on mechanical components like belts, gears, and pumps. This leads to lower maintenance costs and fewer process interruptions. It effectively limits inrush current, helping facilities stay within utility demand charges and preventing voltage dips that can affect other equipment. The device features a compact design, intuitive setup via DIP switches or a keypad, and robust built-in motor protection functions. The ABB YPQ110A is known for its reliability and is part of ABB’s global service and support network.

Application Cases in Industry

This soft starter is widely used in applications with high inertial loads or where mechanical stress and inrush current must be minimized. In water and wastewater treatment, it is used for controlling centrifugal pumps to prevent water hammer. In HVAC systems, it manages fans and compressor motors in large air handling units and chillers. Within material handling, the ABB YPQ110A 3ASD573001A5 starts conveyor belts, crushers, and mixer drives smoothly. It is also common in food and beverage processing, mining, and general industrial machinery for controlling motors driving pumps, compressors, and fans.

Comparison with Competing Products

Competing products include soft starters of similar rating from Siemens (Sirius 3RW), Schneider Electric (Altistart), and Rockwell Automation (SMC Flex). The ABB YPQ110A 3ASD573001A5 competes through ABB’s strong brand recognition in motor control and its integration benefits with other ABB drives and control gear. It often compares favorably in terms of its physical compactness for the given current rating, ease of use, and the robustness of its design. Compared to variable frequency drives (VFDs), the YPQ110A offers a more cost-effective solution for applications that only require controlled starting and stopping without the need for speed variation during operation.

Selection Suggestions and Precautions

Selecting the ABB YPQ110A 3ASD573001A5 requires matching its 110A current rating to the full-load amperage (FLA) of the motor it will control, with an appropriate safety margin (typically 1.1-1.25 times FLA). Verify the supply voltage matches the soft starter’s voltage range. Consider the required control features: number of digital inputs/outputs, communication options (if needed), and the specific starting torque profile (pump, conveyor, etc.) to ensure the device can be properly configured. For heavy-duty or high-inertia starts, consulting the application engineering guidelines is essential.

Precautions:

• Installation and wiring must be performed by qualified personnel following ABB’s installation manual and local electrical codes.

• Ensure proper sizing of upstream fuses or circuit breakers as specified by ABB to provide short-circuit protection.

• The soft starter must be adequately cooled; provide sufficient clearances in the cabinet and ensure ambient temperature limits are not exceeded.

• Bypass contactors are often used in parallel with soft starters for continuous operation; if used, the control logic must be correctly implemented to avoid conflicts.

• Motor protection settings (overload, etc.) must be coordinated with the motor’s nameplate data and the application’s duty cycle.

1794-ADN AB
1784-KT AB
1756-M13 AB
1746-IB16 AB
1746-IB8 AB
1746-NO4I AB