Operating Voltage: Typically 24VDC.
Current Range: 100-400A.
Weight: Approximately 2KG.
Exact dimensions may vary slightly based on the manufacturer’s specifications. However, it is generally designed for a compact form factor, suitable for installation in tight spaces.
The module has specific electrical and operational parameters that enable it to function effectively within the system.
It supports PLC/DCS systems and offers powerful control functions.
The dimensions of the EPRO A6370D may vary depending on the specific model and version.
One source indicates its dimensions as 26mm x 33mm x 37mm, while another gives a larger size of 90mm x 33mm x 243mm.
Brand: EPRO
Model: MMS3120/022-000
Voltage: 24V
Current Range: 100-400A
Weight: 2KG
Package: Intact
Application: Industrial use
Alarm Type: Visual alarm
Configurable Settings: All 469 settings are divisible into categories such as device settings, system settings, digital input settings, output relay settings, thermal model settings, current component settings, motor start settings, RTD temperature settings, voltage component settings, power component settings, monitoring settings, analog input/output settings, dual-speed motor settings, and test settings
Dimensions: 127.5mm x 125.75mm x 80mm (Width x Height x Depth)
Weight: 0.16kg
Model: PR6426/010-010+CON021
Brand: EPRO
Product Type: Sensor
Measurement Range: Static: ±4.0 mm; Sensitive: 2 V/mm
Measurement Target: Conductive steel
Measurement Target Form: Cylindrical axis, plain surface, measurement axis ring
Axis Diameter: ≥200 mm
Nominal Gap (Center Measurement Range): 5.5 mm
Measurement Error: Depends on calibration conditions and the connection with the signal converter
Linear Error: ≤±1.5%
Temperature Error: Zero: 200 mVs/100 K; Sensitivity: <2%/100 K
Power Supply Voltage Impact: <20 mV/V
Operating Temperature Range: -35 to +180°C (short-term: up to +200°C)
Storage and Transportation Temperature Range: -40 to +70°C
Model: EPRO PR6423/010-100+CON021
Type: Eddy current displacement sensor
Sensitivity/linearity: 8 V/mm (203.2 mV/mil) ≤±1%
Air gap (center) Nominal value: approx. 1.5 mm (0.06 in)
Long-term drift: <0.3%
Measuring range: static ±1 mm (0.040 in); Dynamic 0 to 500μm(0 to 0.020 in)
Target/Surface material: Ferromagnetic steel (42 Cr Mo4 standard)
Maximum surface velocity: 2500 m/s (98425 ips)
Shaft diameter: ≥25 mm
Operating temperature range: Sensors and cables: -35 to 200°C (-31 to 392°F); Connector: -35 to 150°C (-31 to 302°F)
Pressure resistance of sensor head: 10000 hpa (145 psi)
Voltage: 24V
Current: 100-400A
Output contacts: Connector DIN 41612 H15 with * PE conductor
Operating temperature: Not specifically provided, but usually from -25 ° C to +70 ° C in such equipment
Frequency range: 47-63 Hz
Accuracy: 1%
Size: The specific size is not provided, but refer to the similar product UES815S9500, whose size is 9mm
Weight: 2KG
weight
Weight: 2KG
argument
Voltage: 24V
Current: 100-400A
Output contacts: Connector DIN 41612 H15 with * PE conductor
Operating temperature: Not specifically provided, but usually from -25 ° C to +70 ° C in such equipment
Frequency range: 47-63 Hz
Accuracy: 1%
Specifications and dimensions
Size: The specific size is not provided, but refer to the similar product UES815S9500, whose size is 9mm
Weight: 2KG
weight
Weight: 2KG
Brand: EPRO.
Model Number: MMS6823R 9100-00001-06.
Input Voltage Range: 18-36VDC.
Output Voltage Range: 5VDC.
Current Consumption: 150mA (average), with a maximum of 2A (peak).
Interface Types: RS485, MODBUS RTU, Ethernet/IP.
Protection Level: IP20.
Accuracy: ±1% full scale for range measurements.
Temperature Range: -20℃ to +100℃ for operation.
Relative Humidity: ≤80%.
Brand: EPRO
Model Number: A6370D
Type: Monitoring and Control Module
Function: Power control, monitoring, and protection
Supported Systems: PLC/DCS systems
Voltage: 220V
Weight: 2.3 kg
System Environment: Room temperature
Power: 2700W
Model: EPRO PR6423/010-100+CON021
Type: Eddy current displacement sensor
Sensitivity/linearity: 8 V/mm (203.2 mV/mil) ≤±1%
Air gap (center) Nominal value: approx. 1.5 mm (0.06 in)
Long-term drift: <0.3%
Measuring range: static ±1 mm (0.040 in); Dynamic 0 to 500μm(0 to 0.020 in)
Target/Surface material: Ferromagnetic steel (42 Cr Mo4 standard)
Maximum surface velocity: 2500 m/s (98425 ips)
Shaft diameter: ≥25 mm
Model: EPRO PR6424/001-020+CON021
Type: Combination of vortex displacement sensor and signal converter
Measuring range: Depending on the specific model and application scenario, it is usually used to measure shaft vibration, relative shaft vibration and bearing vibration
Accuracy: Provides high precision displacement measurement
Stability: The design is stable, suitable for long-term monitoring and control
Application temperature range: usually between -35°C and 200°C
Installation method: Usually through threaded or flange connection installation
Sensor type: eddy current non-contact sensor
Touch code: pr6424/003-030
Touch range: 4 mm – 10 mm
Touch diameter: 16 mm
Operating temperature: -35 c – 180 c
Range frequency: 0-20 KHZ (-3db)
Transformer configuration: expands to 10 mm
Cable length: 4-10 m