Model Number: 85UVF1-1QDK3.
Brand: FIREYE.
Type: Flame Detection Sensor.
Detection Range: Can detect UV wavelengths of 295-340 nm and visible light wavelengths of 310nm to 500nm.
Dimensions & Weight:
Dimensions: The exact dimensions are not provided in all references, but they typically vary based on the model and its attachments. Some references mention dimensions around 140 mm x 95 mm x 82 mm, while others may have different measurements.
Detection elements: ultraviolet (UV) and infrared (IR) detection elements
Signal output: Standard 4-20mA flame intensity signal output
Power supply requirement: 24Vdc
Connection: 8-pin electrical quick-release connector with cable connection (QD model)
specification
Dimensions: Length 68mm x width 59mm x height 68mm
Weight: 2.56kg
The FIREYE EB700 sensor is a high quality sensor designed for fire detection and monitoring. It is designed to provide accurate and reliable detection of flame and combustion processes in a variety of industrial applications. With its advanced technology and rugged construction, the EB700 sensor provides reliable fire protection and early warning capabilities.
Product parameters :* * * *
– Power supply mode :24vdc
– Sensing range: up to 30 feet
– Response time: Less than 3 seconds
– Operating temperature :-40 ° C to 85 ° C
– Communication mode :RS485 Modbus RTU
– Enclosure :ip65 rating
The FIREYE 95UVS2-1 module is used to detect the presence or absence of a flame in the combustion chamber. It uses ultraviolet (UV) sensing technology to monitor the flame and provide feedback to the control system.
Product parameter
– Model :95UVS2-1
– Input voltage :120VAC
– Sensitivity: adjustable
– Response time :<1 second
– Operating temperature :-40 ° C to 70 ° C
– Output: relay contact
The FIREYE 85UVF1-1QDK3 is a flame detector specifically designed to detect the presence of flames. The following is a detailed explanation of the parameters, specifications, dimensions, weight, series, features and functions of FIREYE 85UVF1-1QDK3:
argument
Detection elements: ultraviolet (UV) and infrared (IR) detection elements
Signal output: Standard 4-20mA flame intensity signal output
Power supply requirement: 24Vdc
Connection: 8-pin electrical quick-release connector with cable connection (QD model)
specification
Dimensions: Length 68mm x width 59mm x height 68mm
Weight: 2.56kg
trait
Self-test probe: Detects ultraviolet (UV) at 295-340nm and infrared (IR) at 830-1100nm
Optical filters: The use of advanced optical filters, adjust the optical sensitivity, can detect visible light wavelengths from 310nm to 500nm
Modular design: can be customized and extended according to different application requirements
–Detection Technology: Utilizes solid-state flame detection sensors to detect flame flicker characteristics12.
–High Precision: Offers high precision in detecting flame presence and status12.
–Stability and Reliability: Known for its high stability and reliability in industrial environments12.
Dimensions and Weight:
–Dimensions: Approximate dimensions are 60.2mm (W) x 138.5mm (H) x 109mm (D)
Series:
Belongs to the Fireye series of flame detectors and scanners, known for their advanced flame detection capabilities
Sensing Range: 190-350 nanometers of the ultraviolet spectrum1
Sensitivity: High, capable of detecting small flames1
Input Signal: 4-20mA analog input signal and red digital pulse input signal1
2.Specifications:
Designed for real-time, fast response to flame signals2
Suitable for detecting flames from alkyl, olefins, alkanes, and other combustible gases2
High temperature stability and reliability for long-term stable operation1
3.Dimensions & Weight:
Size: 119mm x 89mm x 70mm (as mentioned in one source)1
Weight: Approximately 1kg (estimated based on typical industrial scanner weights; exact weight may vary)3
Note: Another source mentions 56*89mm for dimensions, which could be a typographical error or a specific variant. Always refer to official documentation3
argument
Sensing range: 190-350 nm ultraviolet spectrum
Sensitivity: Suitable for flame detection such as flame point, flame rod and flame cone
Input signal: 4-20mA analog input signal and red digital pulse input signal
specification
Equipment type: High performance flame detection equipment
Technology: UV detection technology
dimension
Size: 119mm x 89mm x 70mm
weight
Weight: 1kg
Parameters and specifications
Sensing range: 190-350 nm ultraviolet spectrum.
Sensitivity: High, capable of detecting tiny flames.
Input signal: 4-20mA analog input signal and red digital pulse input signal are optional.
Stability and reliability: It has stability and reliability under high temperature conditions, and can run stably for a long time.
Size and weight
Size: Different search results give different size information. One way of saying is 119mm x 89mm x 70mm, another way of saying is 56*89mm.
Weight: 1kg.
argument
Brand: Fireye
Model: 85UVF1-1CEX
Power supply: logic power supply 12-36VDC, motor power supply 12-72VDC
Current: Continuous current 12A, peak current 30A
Communication channel: RS232, CAN2.0B (optical isolation, up to 1MBit/s)
Control commands: RS232/CAN communication command, pulse + direction, +-10V analog reference, I/O input
Programmable digital I/O: 7 programmable digital inputs (enable, reset, left/right limit, origin, universal), 6 programmable digital outputs (servo preparation, alarm, universal)
Analog input: 2 +-10V analog input (reference analog input, analog feedback input)
specification
Structure: Compact enclosed structure (136x86x29mm)
Control mode: position, speed, torque
Operation mode: Single or multi-axis (Master/Slave, up to 256), off-line operation (Stand alone)
Motion modes: programmable T or S curves, electronic gears, electronic cams, PT/PVT, synchronization, external controls, multiple event triggers, etc
Size and weight
Size: 136x86x29mm (compact enclosed structure)
Weight: Approx. 48kg (FIREYE radiation detector 85UVF1-1CEX weight, but please note that this is not the direct weight of the flame detector, for reference only)
