Model: EPRO PR6423/010-100+CON021
Type: Eddy current displacement sensor
Sensitivity/linearity: 8 V/mm (203.2 mV/mil) ≤±1%
Air gap (center) Nominal value: approx. 1.5 mm (0.06 in)
Long-term drift: <0.3%
Measuring range: static ±1 mm (0.040 in); Dynamic 0 to 500μm(0 to 0.020 in)
Target/Surface material: Ferromagnetic steel (42 Cr Mo4 standard)
Maximum surface velocity: 2500 m/s (98425 ips)
Shaft diameter: ≥25 mm
Model: EPRO PR6424/001-020+CON021
Type: Combination of vortex displacement sensor and signal converter
Measuring range: Depending on the specific model and application scenario, it is usually used to measure shaft vibration, relative shaft vibration and bearing vibration
Accuracy: Provides high precision displacement measurement
Stability: The design is stable, suitable for long-term monitoring and control
Application temperature range: usually between -35°C and 200°C
Installation method: Usually through threaded or flange connection installation
Sensor type: eddy current non-contact sensor
Touch code: pr6424/003-030
Touch range: 4 mm – 10 mm
Touch diameter: 16 mm
Operating temperature: -35 c – 180 c
Range frequency: 0-20 KHZ (-3db)
Transformer configuration: expands to 10 mm
Cable length: 4-10 m
Epro mms6120 9000-00002-10 controller is a high-performance controller designed for industrial applications. It offers enhanced capabilities and reliable performance for accurate control and monitoring.
– model: mms6120 9100-00002-10
– input voltage: 24v dc
– output voltage: 0- 10v dc
– communication interface: rs485
– operating temperature: – 10 to 60 degrees
– dimensions: 100 mm x 50 mm x 30 mm
– product name: epro con011 module
– product description: the epro con011 module is a high-performance component designed for a wide range of applications.
– model number: 9200-00001
Compatibility: compatibility with different systems and devices
– input voltage: 5v
– output voltage: 3.3v
– size: compact
– communication interface: rs485, rs232
– power supply: 3.3v
– operating temperature: -40 c to 85 c
– data transfer rate: up to 115.2kbps
– supported protocols: modbus rtu, modbus ASCII
– model: cr-gen0-m6400r3
– compatibility: compatibility with different systems and platforms
– connection: Ethernet, usb, rs232
– power supply: dc 12v
– operating temperature: -40 c to 85 c
– dimensions: 100 mm x 80 mm x 15 mm
Power supply function : The UES815S power module can be mounted directly on the printed circuit board, and provides power for digital or analog loads such as ASIC, DSP, microprocessor, memory, FPGA
protective function : the module has built-in overcurrent, overheat, short circuit and other protective functions to ensure the safety of electrical equipment
modular design : easy to install, repair and replace
High reliability : well designed for stable operation in harsh environments
widely used : widely used in switching equipment, access equipment, mobile communication, microwave communication, optical transmission, router and other communication fields as well as automotive electronics, aerospace and other fields
Model: PR6426/010-140+CON021
Type: Eddy current sensor
Measuring range: 1mm to 20mm
Thread sizes: Φ6mm, Φ10mm and Φ18mm metric or imperial threads
Working voltage: 24V
Working current: 100-400A
Weight: 2KG
Model number: CON021/916-200 or CON021/916-240
Weight: 2KG
The product is the controller ecpsr086670-001 epro, designed mainly for the management of production equipment. Here are the product details:
Ecpsr086370-001 epro is a high-performance industrial controller that can be used in various industrial scenarios. The controller USES advanced technologies with efficient, stable properties and reliable operation. At the same time, it has a good expansive ability to adapt to the requirements of various applied scenes.
The EPRO MMS6823R module is a high-performance module for industrial applications. It provides advanced features and reliable performance for a variety of systems.
– Input voltage :3.3V
– Operating temperature :-40 ° C to 85 ° C
– Interface :I2C
– Dimensions :25mm x 25mm
Model number : PR6423/013-030+CON021
Measurement method : non-contact measurement, using eddy current principle to measure the thickness of non-magnetic material
Sensor diameter : 8mm
configuration options : Multiple configurations are available, including cable type (armoured or unarmoured), cable end (self-locking waterproof connector or bare wire), measurement range
Operating temperature range : may vary depending on the specific configuration, but is usually wide, such as -35 ° C to +380 ° C