Parameters & Specifications:
–Model: MTR-4-215
–Type: Likely a control module or transducer, but specific functionality may vary12
–Compatibility: Designed for use in DCS (Distributed Control Systems) and automation control systems13
–Inputs/Outputs: Depending on the model, may include analog and digital inputs/outputs for signal processing
Series:
1.Parameters:
–Input Voltage: 220-380V1
–Output Frequency: 30-60Hz or 30kHz12
–Power: 44-79HZ1 (Note: This might be a typographical error, typically referring to frequency ranges)
2.Specifications:
–Brand: DEIF
–Model: EPQ96-2
–Type: Hardware, Control System Communication Module1
–Operating Environment: Temperature 1-54°C, Humidity 10-90%RH1
3.Dimensions & Weight:
–Width: 891-1531mm (likely refers to the associated panel or enclosure, not the EPQ96-2 unit itself)1
–Depth: 234mm (an estimated dimension based on general industrial module sizes)1
–Height: Not specified directly; varies based on mounting or enclosure
–Weight: 2-7kg (an estimated range based on similar industrial electronic units)1
argument
Measurement parameters: flow current /SCD
Power Supply: 230 Vac
Measuring range: -1000 to +1000 mV
Accuracy: 0.1%
Flow rate: 1 L/min (standard), 5 GPM (high flow rate optional)
Response time: 1 second
Output: 4~20mA, -10 ~ + 10V, 0~10V, Modbus (optional)
specification
Shell: NEMA 4x, IP 65
Mounting hole size: 11.0 “x 6.00”
Weight: 20 lbs, 9 kg
weight
20 lbs, 9 kg
argument
Input voltage: 100-600VAC
Rated frequency: 50/60Hz
Output: 4-20mA and 0-10VDC
Operating temperature range: -25℃ to +70℃
Power supply voltage: 100-240VAC (for power input)
Relative humidity: 20-95%RH (non-condensing)
specification
Size: There are many versions, such as 72mm x 72mm x 83mm,
Parameters and specifications
FAS-113DG is a synchronizer used to synchronize a generator to the busbar.
It has a dynamic synchronization function to ensure that the reverse power condition is prevented at the difference frequency.
FAS-113DG determines when to send a closing signal to the generator switch by comparing the actual measured slip rate with the closing time of the circuit breaker.
It also has analog frequency outputs and analog voltage outputs to jointly control the frequency and voltage of DEIF load distribution units such as LSU-112/113/114DG and LSU-122DG.
Weight:
Approx. 250g (one size)
1.26kg (another specification, may vary depending on product version or configuration)
Characteristic and function
Load balancing: used to monitor the load of the power system to ensure the load balance between each generator set, so as to reduce the overload or insufficient load and improve the stability of the system.
Multi-generator support: Support to connect multiple generator sets, and can simultaneously monitor and control the output of these generator sets.
Automatic adjustment: The load share of the generator set can be automatically adjusted to ensure that each generator set is allocated the appropriate load according to its capacity and performance characteristics.
effect
Industrial automation: MTR-4-215 may be used in the field of industrial automation as part of control systems, monitoring systems or data acquisition systems.
Process control: In the chemical, oil, gas, power and other industries, it may be used to monitor and control key parameters in the production process.
Data acquisition and transmission: May be responsible for collecting field data and transferring it to a central control system or host computer for further processing and analysis.
Parameters and Specifications:
Parameters:
Specifications:
Dimensions and Weight:
