GE IS420UCSBH4A

¥9,999.00

GE IS420UCSBH4A is the core UCSB controller for GE Vernova Speedtronic Mark VIe turbine control platform. It is the main computing unit for gas turbine, steam turbine and generator excitation control (EX2100e / LS2100e). It runs QNX Neutrino real-time operating system, executes speed governing, load control, startup/stop sequence, protection trip logic and fault diagnosis. It connects to distributed I/O packs via dedicated IONet Ethernet. It is fanless passive cooling, suitable for high vibration turbine cabinets, and supports simplex, dual redundant and TMR triple modular redundant configurations.

Category:

Description

Specifications

  • Part Number: IS420UCSBH4A
  • Series: Mark VIe, EX2100e, LS2100e
  • Processor: Intel EP80579 1066 MHz
  • Memory: 256 MB DDR2 SDRAM + 512 MB Flash
  • OS: QNX Neutrino real-time multitasking OS
  • Communication: Multiple IONet Ethernet ports, 10/100/1000 Mbps, PTP IEEE1588 time synchronization
  • Power supply: 24 VDC
  • Mounting: DIN rail / panel mounting
  • Operating temperature: -30°C ~ +65°C
  • Humidity: 0–95%, non-condensing
  • Safety: SIL1 capable, UL Class I Div.2 certification
  • Indicators: Power, fault, link, status LEDs

Advantages and Features

GE IS420UCSBH4A adopts distributed IONet architecture, I/O packs are separated from the controller. It supports hot swap of I/O packs without interrupting the main control. Comprehensive self-diagnosis covers CPU, memory, network and application logic. Redundant controllers realize data synchronization and bumpless switch. Fanless design reduces failure points in turbine cabinet. It supports local debugging and firmware upgrade through console port.

Application & Case

It is widely used in combined-cycle gas turbine, steam turbine, generator excitation control and large industrial drive control. In a combined-cycle power plant Mark VIe overhaul project, IS420UCSBH4A replaced the faulty UCSB controller. After downloading control logic and synchronizing redundant data, turbine speed regulation, sequence control and protection trip functions returned stable.

Comparison

Compared with other UCSB variants such as IS420UCSBH1A / IS420UCSBH3A, IS420UCSBH4A is a higher-performance version with different memory and firmware. It is different from safety UCSBSIA controllers for Mark VIeS safety systems. It cannot work with old Mark VI / Mark V racks, and is incompatible with ABB, Bently, Emerson EPRO systems.

Selection Notes

Confirm full part number IS420UCSBH4A. Confirm whether it is simplex, dual or TMR configuration. Verify matching IONet I/O packs and control software version.

Precautions

Cut off 24VDC power before replacement and take ESD protection. Check IONet network cable and IP setting. After installation, download control application, verify redundant synchronization, sequence test, protection trip test before putting into service.

EMERSON CE4001S2T2B4
EMERSON CE4003S2B1
EMERSON CE4003S2B6

Reviews

There are no reviews yet.

Be the first to review “GE IS420UCSBH4A”

Your email address will not be published. Required fields are marked *

Post comment