ABB 3BHE024415R0101 GVC714A101

¥999.00

The ABB 3BHE024415R0101 GVC714A101 is a high-performance digital input module for the ABB Ability™ System 800xA and Procontrol P14 control platforms, designed for high-density monitoring of 24VDC and 48VDC field devices in industrial automation and power generation applications. This module provides 32 digital input channels with advanced diagnostics, programmable debounce filtering, and wetting current for dry contact sensing. The ABB 3BHE024415R0101 GVC714A101 is optimized for turbine trip signal monitoring, breaker status tracking, and sequence-of-events recording. Each channel includes high-voltage transient protection and independent channel isolation. The module communicates via the ABB S100 I/O bus with deterministic 1ms scan rates.

Category: ABB

Description

Parameters

Parameter	Specification
Input Channels	32, optically isolated
Input Voltage Range	0–60VDC (threshold: 12V min for ON)
Input Impedance	10kΩ
Input Debounce	Programmable: 0.1ms–100ms (per channel)
Input Wetting Current	5–15mA (programmable per channel)
Diagnostics	Open-wire detection, stuck-at detection, input state readback, over-temperature
Protection	Transient suppression (MOV + TVS), reverse polarity protection
Isolation	2500Vrms (input-to-backplane); 500VDC (channel-to-channel)
Update Rate	1ms (deterministic)
Power Supply	24VDC (aux and wetting), 300mA
Operating Temp	-40°C to +70°C
Mounting	Eurocard (6U, 160mm)
Certifications	UL, CSA, ATEX Zone 2, SIL 2 capable

Advantages & Features

High Channel Density – 32 digital inputs in a single slot, reducing rack space and simplifying wiring.
Programmable Wetting Current – The ABB 3BHE024415R0101 GVC714A101 provides 5–15mA wetting current per channel, ensuring reliable dry contact switching without external interface relays.
Configurable Debounce – Per-channel debounce settings (0.1ms–100ms) reject contact bounce and electrical noise.
Comprehensive Diagnostics – Continuous open-wire and stuck-at detection ensure input integrity; faults reported to the controller within one scan cycle.
SIL 2 Capable – Suitable for safety-critical applications with appropriate proof-testing and voting logic.
High Transient Protection – Built-in MOV and TVS protection for harsh industrial environments.

Application Cases

Turbine Trip Signal Monitoring – Monitors 32 protection signals (overspeed, over-temperature, low lube oil, ESD pushbuttons) with fast response.
Breaker Position Monitoring – Reads 32 breaker auxiliary contacts in generator switchyards.
Valve Limit Switch Monitoring – Monitors 32 valve limit switches across multiple turbine and HRSG valves.
Motor Control Center Status – Tracks motor starter status, run feedback, and fault signals for predictive maintenance.

Competitor Comparison

Feature	ABB 3BHE024415R0101	Siemens 6ES7421-1BL00	GE DS4815DTDB	Rockwell 1756-IB32
Input Channels	32	32	32	32
Voltage Range	24–48VDC	24–240VAC/VDC	24–250VAC/VDC	24–240VAC/VDC
Wetting Current	Yes (5–15mA)	No	Yes (5–20mA)	No
Debounce	0.1ms–100ms (per ch)	Fixed	0.1ms–100ms (per ch)	Fixed
Diagnostics	Open-wire, stuck-at	Open-wire (limited)	Open-wire, stuck-at	No
SIL Rating	SIL 2	SIL 1	SIL 2	SIL 1
Integration	ABB System 800xA	Siemens TIA	GE Mark VIe	Rockwell Logix

The ABB 3BHE024415R0101 GVC714A101 offers high channel density with programmable wetting current, debounce, and comprehensive diagnostics — features comparable to GE’s DS4815DTDB but with ABB System 800xA integration.

Selection Suggestions

Choose for ABB System 800xA applications requiring 32 high-density digital inputs with programmable wetting current and debounce.
For higher voltage (125VDC/240VAC) applications, use the GVC714A102 variant.
For SIL 2 applications, use with external voting logic (2-out-of-3) and periodic proof-testing (every 24 months).
Set debounce times based on application: 1–5ms for trip signals, 10–20ms for contactors, 50–100ms for noisy limit switches.
Pair with matching ABB TU810 or TU830 termination unit.

Precautions

Wetting Current Selection – For dry contacts, enable wetting current (5–15mA). For voltage-driven inputs (e.g., PLC outputs), disable wetting current.
Input Threshold – Minimum ON-state voltage is 12V. For signals below 12V, use external relays.
Debounce Trade-offs – Shorter debounce (0.1ms) provides faster response but may pass noise. Longer debounce (100ms) rejects noise but delays detection.
Open-Wire Detection – Disable for channels with very high-impedance sources to avoid false alarms.
Power Supply – The module draws 300mA from 24VDC plus wetting current. Ensure adequate capacity.
Firmware – Requires ABB System 800xA firmware version 6.0 or higher.
ESD Handling – Use ESD-safe practices when handling the module.

DDK ׿ SAN4 II-40M-P PNP)
A-B 1747-L542ϵ и ӣ ͷ
BENTLY 167699-02

Reviews

There are no reviews yet.

Be the first to review “ABB 3BHE024415R0101 GVC714A101”