IS205DSRGG1AAA GE

¥999.00

The GE IS205DSRGG1AAA is a VMEbus terminal board manufactured by General Electric for the Mark VIe distributed control system (DCS). This board is a dedicated Digital Signal Processing and General-Purpose I/O module, designed to provide high-speed, flexible digital input/output and signal processing capabilities for turbine control applications. The GE IS205DSRGG1AAA combines the base “H1A” capabilities with the “AAA” suffix enhancements—typically indicating military-grade components, extended burn-in (120 hours), 100% X-ray/AOI inspection, and conformal coating as standard for maximum reliability in harsh environments. This board is designed for critical digital signal processing and I/O applications in demanding turbine control environments.

Category: GE

Description

Key Specifications

Parameter	Specification
Digital Inputs	16 high-speed digital inputs (optically isolated)
Digital Outputs	16 high-speed digital outputs (optically isolated)
Input Voltage Range	24 VDC nominal (18–32 VDC)
Output Voltage Range	24 VDC nominal (18–32 VDC) — external field power required
Output Current	0.5 A per channel (continuous)
Signal Processing	Programmable frequency/pulse measurement, high-speed counter, pulse-width modulation (PWM)
Protection	Reverse polarity, overvoltage, overcurrent, short-circuit
Diagnostics	750-event fault log with timestamps (expanded over base)
Operating Temp	–25 °C to +70 °C (extended range)
Humidity	5–95% non-condensing (with conformal coating)
Coating	Conformal coating (standard) — UV-traceable
Manufacturing	120-hour burn-in, 100% X-Ray/AOI, military-grade components
Form Factor	6U VME64x (160 × 233 mm), single-slot width
Power	10 W (+5 V / +3.3 VDC) + external 24 VDC field power
Connectors	Front-panel 32-pin terminal block with gold-plated contacts and captive washer screws

Advantages & Distinctive Features

High-Speed Digital I/O: 16 inputs and 16 outputs capable of handling high-frequency digital signals.
Built-in Signal Processing: Programmable frequency measurement, high-speed counting, and PWM generation.
Flexible Input/Output: Configurable for sourcing (PNP) or sinking (NPN) per bank.
Optical Isolation: 1500 VDC isolation protects the backplane from field wiring faults.
Conformal Coating Standard: Protects against humidity, salt spray, and chemical vapors.
Extended Temperature Range: –25 °C to +70 °C operation.
Expanded Diagnostic Log: 750-event fault log for comprehensive troubleshooting.
Military-Grade Manufacturing: 120-hour burn-in, 100% X-ray/AOI, military-grade components.
Gold-Plated Captive Washer Terminals: Corrosion-resistant and vibration-proof connections.
Hot-Swappable: No rack power-down for replacement.
Direct Retrofit: Replaces older DSRG series boards.

Application Fields

Gas Turbines: Speed measurement, pulse counting, valve control, position feedback
Steam Turbines: Speed monitoring, pulse generation, actuator control
Compressors: Surge control, speed measurement, valve control
Generators: Frequency measurement, synchronizing control
Offshore platforms: Salt-spray environments requiring conformal coating

Comparison with DSRGG1A and Competitors

Feature	GE IS205DSRGG1AAA	GE IS205DSRGG1A	Competitor A	Competitor B
DI/DO Channels	16 + 16	16 + 16	16 (separate)	16 + 16
High-Speed Capability	Yes	Yes	No	No
Frequency Measurement	Yes	Yes	No	No
PWM Generation	Yes	Yes	No	No
Coating	Standard	Optional	Optional	Optional
Temp Range	–25 to +70 °C	0 to +60 °C	0 to +55 °C	0 to +55 °C
Fault Logging	750 events	500 events	No	No

Selection Guidelines

When to choose:
- Critical digital I/O and signal processing applications
- Harsh environments (coastal, offshore, chemical)
- Applications needing high-speed frequency/PWM/counter functions
When to choose “H1A” instead: For clean, controlled environments where conformal coating is not required.
Configuration: Configure inputs/outputs for sourcing/sinking per bank.
Signal Processing: Use frequency measurement for speed sensors; PWM for analog output simulation; high-speed counters for pulse counting.
Compatibility: Fits all Mark VIe VME64x racks. Requires ControlST v6.0 or higher.

Operational Precautions

Wiring: Follow GE wiring diagrams—correct polarity for external field power.
Field Power: Properly size external 24 VDC supply.
Signal Processing: Test frequency/PWM/counter functions during commissioning.
LED Diagnostics: Green = input/output on; Amber = fault; Red = module fault.
Fault Log: Access 750-event log via Toolbox ST.
Coating Care: Use GE-approved cleaner; inspect annually under UV—rework voids per GE FSB.
Hot-Swap: Remove/insert slowly under power.
Spare Stock: Maintain 1 spare per 3–4 racks; “AAA” backward-compatible with all DSRG sockets.
ESD: Handle by edges with grounded wrist strap—coating does not protect connectors.
Storage: Anti-static bag with desiccant at –40 to +85 °C; rotate every 3 years.

FOXBORO FBM207 P0916PH
WESTINGHOUSE 1C31227G01
FOXBORO P0916KP-0B

Reviews

There are no reviews yet.

Be the first to review “IS205DSRGG1AAA GE”