Description
Product Parameters
| Parameter | Specification |
|---|---|
| Brand / Series | GE Mark VIe Speedtronic |
| Model | IS200UCVBG1A |
| Analog Inputs | 8 channels (4–20 mA, 0–10 V, ±10 V selectable) |
| Analog Outputs | 4 channels (4–20 mA or 0–10 V selectable) |
| Discrete Inputs | 16 channels (24/48/125 VDC, opto-isolated) |
| Discrete Outputs | 8 channels (relay outputs, Form C, 5A @ 250 VAC / 30 VDC) |
| Analog ADC Resolution | 16-bit SAR (10–500 SPS) |
| Analog DAC Resolution | 16-bit (1–1000 SPS) |
| Analog Accuracy | ±0.1% FS |
| Input Debounce | Programmable 0–100 ms (discrete inputs) |
| Isolation | 1500 VAC (field-to-system) |
| Diagnostics | Analog: open/short, over/under-range; Discrete: open-wire, short-circuit, coil/welded contact monitoring |
| Operating Temperature | –30°C to +65°C |
| Storage Temperature | –55°C to +85°C |
| Mounting | VME rack-mount terminal board with front-panel I/O connectors |
| Backplane Interface | VME64x (A24/A32, D16/D32/D64) |
| EMC Compliance | IEC 61000-4 Level 4 |
Advantages & Key Features
-
Mixed I/O Integration: Combines analog I/O and discrete I/O on a single board, reducing rack space and eliminating multiple specialized boards.
-
High Channel Density: 36 total I/O channels (8 AI, 4 AO, 16 DI, 8 DO) in a single VME slot.
-
Flexible Analog Inputs: Supports 4–20 mA, 0–10 V, or ±10 V signals.
-
Flexible Analog Outputs: Supports 4–20 mA or 0–10 V outputs.
-
Wide Discrete Voltage Compatibility: Discrete inputs auto-range for 24/48/125 VDC.
-
Comprehensive Diagnostics: Analog and discrete diagnostics per channel.
-
Opto-Isolation: 1500 VAC isolation protects the Mark VIe backplane.
-
ToolboxST Integration: Full configuration, monitoring, and diagnostics via GE ToolboxST.
-
Drop-In Replacement: Direct replacement for earlier GE universal controller I/O terminal boards.
Application Fields
-
Gas & Steam Turbines (GE Frame 6B/7EA/9E/HA): Mixed I/O for auxiliary system monitoring and control.
-
Combined Cycle Plants: Auxiliary I/O for HRSG and balance of plant.
-
Compressor Stations: Mixed I/O for compressor auxiliaries.
-
Aeroderivative Turbines: Universal I/O for engine auxiliaries.
Comparison with Competing Products
| Feature | GE IS200UCVBG1A | Competitor A (Mixed I/O Module) | Competitor B (Separate I/O Modules) |
|---|---|---|---|
| Total I/O | 36 (8 AI, 4 AO, 16 DI, 8 DO) | 16 (4 AI, 4 AO, 4 DI, 4 DO) | 32 (requires 4 modules) |
| Isolation | 1500 VAC | 1000 VAC | 500 VDC |
| Operating Temp | –30°C to +65°C | 0°C to 50°C | 0°C to 60°C |
Key Advantage: IS200UCVBG1A provides the highest mixed I/O density in a single board—36 total I/O channels—significantly reducing rack space and simplifying system design.
Selection Guidelines & Recommendations
-
I/O Verification: Confirm your analog input/output and discrete I/O requirements.
-
Controller Firmware: Requires Mark VIe processor firmware v7.5 or later.
-
Spare Strategy: Keep one spare per turbine; lead times 6–10 weeks.
-
Retrofit: Direct replacement—regenerate configuration in GE ToolboxST.
Important Cautions
-
No Hot-Swap: De-energize rack before insertion/removal.
-
Analog Polarity: Observe correct polarity for 4–20 mA loops and voltage inputs.
-
Discrete Polarity: Observe correct polarity for DC inputs.
-
Output Protection: For inductive loads, use external suppression.
-
Grounding: Connect AGND and ISO_GND to Mark VIe system ground at single star point.
-
Shield Termination: Ground shields only at cabinet end.
-
ESD Handling: Use grounded wrist straps; field repair not possible.
-
Channel Mapping: Verify field wiring maps to correct ToolboxST channel numbers.
H0NEYWELL 05701-A-0325
A-B 1756-IF8
A-B 22B-D6P0N104
SCHNEIDER 140CRA21120
Reviews
There are no reviews yet.