GE IS200STAIH2ACB

¥999.00

IS200STAIH2ACB is a high-capacity Analog Input Terminal Board within the GE Mark VIe Speedtronic control system, providing 24 isolated analog input channels with enhanced accuracy and advanced diagnostics. It interfaces with field sensors such as pressure transmitters, temperature transmitters, flow meters, and position transducers, delivering digitized 4–20 mA or 0–10 V signals to the Mark VIe main processor via the VME backplane. Each channel features programmable range selection, built-in filtering, loop power capability, and comprehensive diagnostics including open-circuit, over-range, and loop power fault monitoring.

Category: GE

Description

Product Parameters

Parameter	Specification
Brand / Series	GE Mark VIe Speedtronic
Model	IS200STAIH2ACB
Input Channels	24 isolated analog inputs
Input Types	4–20 mA, 0–10 V, ±10 V (software-selectable per channel)
ADC Resolution	16-bit SAR (10–1000 SPS)
Accuracy	±0.05% FS (25°C), ±0.1% over full temp range — upgraded from standard ±0.1% / ±0.2%
Loop Power	24 VDC (built-in per channel with redundant drivers)
Filtering	Programmable 1–100 Hz with enhanced anti-aliasing
Isolation	2000 VAC — upgraded from 1500 VAC
CMRR	>110 dB @ 50/60 Hz — upgraded from >100 dB
Diagnostics	Open-circuit, over/under-range, loop power fault, reference voltage self-validation
Redundant Loop Power	Dual drivers per channel with automatic failover
Operating Temp	–30°C to +65°C
Mounting	VME rack-mount with front I/O connector
EMC Compliance	IEC 61000-4 Level 4

Advantages & Key Features

High Channel Density: 24 isolated inputs per board—50% more than IS200STAIH1A and triple the density of competing 8-channel modules.
Superior Accuracy: ±0.05% FS accuracy provides highest precision for critical turbine control loops (fuel, steam, overspeed monitoring).
Redundant Loop Power: Dual drivers per channel with automatic failover ensure uninterrupted transmitter power—essential for safety-critical applications.
Enhanced Isolation & CMRR: 2000 VAC isolation and >110 dB CMRR for stable readings in high-EMI environments.
Flexible Input Configuration: Each channel supports current (4–20 mA) or voltage (0–10 V, ±10 V) via GE ToolboxST.
Comprehensive Diagnostics: Open-circuit, over/under-range, loop power fault, and reference voltage self-validation per channel.
ToolboxST Integration: Full configuration, calibration, and diagnostics via GE ToolboxST.
Drop-In Replacement: Direct replacement for IS200STAIH1, IS200STAIG1A, IS200STAIH1A, and IS200STAIH2A.

Application Fields

Gas & Steam Turbines (GE Frame 6B/7EA/9E/HA): Monitors fuel pressure/flow, steam pressure/temperature, bearing vibration, lube oil, cooling water, and valve position.
Combined Cycle Plants: HRSG feedwater flow, steam drum pressure, superheater temperature, condensate flow.
Compressor Stations: Suction/discharge pressure, gas flow, vibration, intercooler temperature.
Nuclear & Offshore: Applications requiring high accuracy, redundant loop power, and enhanced EMC immunity.

Comparison with Competing Products

Feature	GE IS200STAIH2ACB	GE IS200STAIH2A	Competitor A (Emerson)	Competitor B (Siemens)
Channels	24 isolated	24 isolated	8 isolated	8 non-isolated
Accuracy	±0.05% FS	±0.1% FS	±0.2% FS	±0.15% FS
Redundant Loop Power	Yes	No	No	No
Isolation	2000 VAC	1500 VAC	1000 VAC	500 VDC
CMRR	>110 dB	>100 dB	>80 dB	>85 dB
Reference Self-Validation	Yes	No	No	No
EMC Filtering	IEC Level 4	IEC Level 4	Level 2	Level 1

Key Advantage: IS200STAIH2ACB delivers the highest channel density (24 inputs) combined with superior accuracy (±0.05% FS), redundant loop power, and enhanced isolation—making it the premier analog input solution for critical turbine control applications.

Selection Guidelines & Recommendations

Input Type: Configure 4–20 mA or voltage per channel in GE ToolboxST.
Loop Power: Enable internal 24 VDC for 2-wire transmitters; disable for externally powered devices.
Filtering: Use 1–10 Hz for slow signals (temp/pressure), 50–100 Hz for dynamic signals (vibration).
Controller Firmware: Requires Mark VIe processor firmware v8.0 or later.
Spare Strategy: Keep one spare per turbine; lead times 8–12 weeks.
Retrofit: Direct replacement for earlier models—regenerate configuration in GE ToolboxST to access enhanced features.

Important Cautions

No Hot-Swap: De-energize rack before insertion/removal.
Loop Power Polarity: Observe correct polarity for 2-wire transmitters.
Input Protection: Sustained input >30 V or 50 mA may damage circuitry.
Grounding: Connect AGND to Mark VIe system ground at single star point.
Shield Termination: Ground shields only at cabinet end.
ESD Handling: Use grounded wrist straps; field repair not possible.
Filtering Trade-Off: Lower cutoff = better noise rejection but more signal delay.
Loop Power Current Limit: 30 mA per channel—use external supply for higher-current transmitters.

BENTLY 330180-X1-05
BENTLY 330180-X1-CN
B&R 3BP151.4
A-B 1756-IF8

Reviews

There are no reviews yet.

Be the first to review “GE IS200STAIH2ACB”