Description
Technical Specifications
| Parameter | Specification |
|---|---|
| Manufacturer | General Electric |
| Model | IS200JGPAG1A |
| Pulse Inputs | 4–8 pulse inputs (J-type, speed sensors, flow meters) |
| Pulse Amplification | Signal conditioning, amplification, filtering, pulse shaping |
| J-Type Gateway Functions | Pulse data routing, protocol conversion, gateway communication |
| Supported Protocols | Modbus RTU, GE pulse protocols, J-type protocols |
| Communication | J-type serial interfaces, highway integration |
| Power | +5V DC / 2.0A, ±15V DC / 0.4A |
| Temp Range | -30°C to +65°C |
| MTBF | > 108,000 hours |
| Revision Note | “A” suffix = specific hardware/firmware configuration |
Advantages and Key Features
Dedicated J-Gateway Pulse Amplifier: The IS200JGPAG1A provides specialized pulse amplification and J-type gateway communication.
Pulse Signal Conditioning: Amplification, filtering, and pulse shaping for reliable signal detection.
J-Type Gateway Functions: The IS200JGPAG1A enables data routing and protocol conversion.
Application Fields and Case Studies
Used in J-type pulse amplification applications, speed sensing with J-type interfaces, and flow monitoring with gateway communication. In a 600 MW plant, the IS200JGPAG1A provided reliable J-gateway pulse amplification and signal processing.
Comparison with Competing Products
| Dimension | IS200JGPAG1A | IS200JGNDG1AAA | IS200IGPAG2AED |
|---|---|---|---|
| Primary Function | J-gateway pulse amplifier | Network data gateway | Gas pulse amplifier |
| Pulse Amplification | Yes | No | Yes |
| J-Type Support | Yes | Yes | No |
| VME Integration | Direct | Direct | Direct |
Selection Recommendations
Choose IS200JGPAG1A for J-gateway pulse amplification and signal processing applications. Verify compatibility with your specific pulse sensors and J-type gateway requirements. Deploy for speed sensing and flow monitoring applications.
Precautions and Important Notes
Use ESD-safe handling. Verify field wiring and pulse connections. Confirm compatibility with your specific pulse sensors and J-type gateway requirements. Never interrupt firmware updates. Board draws 2.0A – verify rack power capacity. Document all configurations. Store spares in anti-static packaging. Do not mix variants in redundant pairs. Allow 30 seconds boot time. Test all pulse amplification and gateway functions during commissioning. The IS200JGPAG1A is critical for pulse signal processing – ensure all settings are verified before placing in service. Ensure proper shielding for pulse signals to avoid noise interference. Regular verification of pulse signal quality and gateway communication is recommended. Ensure communication cabling does not exceed maximum recommended length.
ABB AI810
OPTI T60-1001-C8-1A
WESTINGHOUSE 1C31125G02
WEISTINGHOUSE 1C31125G02
Reviews
There are no reviews yet.